Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

wax finish

Posts

wax finish

#1

wax finish

Glenn Kistler

>I recently watched a video where it seemed that the bowl was finished with wax being applied to the bowl after sanding without sealing the bowl. I am not sure if it was bee's wax or some other product. it was melted on by friction and then spread out using a cloth and finally buffed to a beautiful finish. Can some one help clear up the prodcut likely used and where it might be obtained.

Re: wax finish

#2

Re: wax finish *LINK*

Russ Fairfield

>The stick wax by HUT Products would be my guess, but it could have been beeswax or paraffin..

I am trying to get everything I know about wax on my website. There are a few pages left, but the oage on using stick waxes is there at the linkmost of it is at the link.


Wax, friction application

Re: wax finish

#3

Re: wax finish

John Veerkamp, Western Mo

>Glenn,

I've used Briwax finish Boxelder and maple. I sand 320, 400 and 600 grits with wax fast enough to heat up and seep into the wood. After the last sanding , let the wax cool and then buff. It produces a lovely look and feel.

John

Re: wax finish

#4

Re: wax finish

Thad

>I use beeswax quite often with the process you outlined. here's my most recent beeswax finished piece. It does a nice job of leaving light colored wood light. Magnolia w/Nat. Edge, 9"x4-3/4", beeswax finished immediately after sanding, no sealer.


img