Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Nova Live Center

Posts

Nova Live Center

#1

Nova Live Center

Ken Kimura

>Thanks to all for your help for removing the insert on my Nova chuck. I picked up the Nova Live Center with a new insert. I'm not convinced of the tolerances on the live center. In the first place, I see it's manufactured in PRC whereas my chuck was manufacture in NZ. The finish seems crude by comparison. The different centers are tapered to fit the body but they insert to different depths. The miniature extension center goes the deepest at 1/2 inch while the others seat to around 1/4 inch. What is the situation with others who have this product?

I would normally just throw it on the lathe to see how it worked but the lathe is down waiting for a part. Just contemplating while I wait.

Re: Nova Live Center

#2

Mike Mills

Re: Nova Live Center

Mike Mills

>Hi,

I've had mine about a year with no problem. Being an amateur I have probably subjected it to more abuse (really bad catches) than most would. I did not check how far the bits seat but I have never had them come "unseated".

The point on the cup center also comes out; you just have to use a small phillips head or something similar to pop it out.

Mike