Turning Tamarac
Jerry Klug
>I have been trying to turn a natural edge bowl from tamarac. I normally do not turn soft woods except for skew practice. This time I am trying to make a bowl for friends that relocated to a mountain top in north central Washington very near the Canadian border. They built their retirement home on 21 acres at 4000 ft altitude and the Tamarac is from their fire defense clearing work.
So far my results have been disapointing as I haven't figured out how to keep the edge check cracks from forming. The tree was cut last winter but not bucked until mid summer. I bandsawed the piece down the center and then round right before turning. The wood is very green and wet. The first attempt started cracking as I was sanding the outside. The second attempt I spritzed the wood to keep it wet and only sanded to 180. The wood was wet enough that my sandpaper steadily gummed up. This piece the wood stayed damp and cool to the touch. As I roughed out the inside, the edge cracks started when I got down to about 3/16" wall thickness.
Do I need to rough thicker and boil the wood?
Anyone out there that has successfully turned green Tamarac thin?



