Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Back in the saddle

Posts

Back in the saddle

#1

Back in the saddle

mikevermont

>I received a new controller board for my Woodfast. Took a while, but I got it installed and all put back together. Turned her on and purred like a kitten again. Too late to put something on the lathe, but at least it's running. I'm a happy camper.

Re: Back in the saddle

#2

That's Good News !

Don Orr

>

Re: Back in the saddle

#3

Re: Good news, but for the rest of.....

Jamie Donaldson

>....Woodfast owners, where and how was the replacement available? Did you replace the board yourself, or was it repaired by a supplier of electronics?

Re: Back in the saddle

#4

Re: Good news, but for the rest of.....

mikevermont

>Jamie, I posted my woes here when the controller failed looking for solutions since Denver Ulery, who made the controls, passed away. I took the box apart and found the board was made by Minarik. I found them at Minarik.com they still had the board and sent me one. Pretty easy to switch out. I think the problem was really just a couple of capacitors, but I am no electronic engineer. I tried getting a couple of replacements at Radio Shack, btu they did not have the same one, and I didn't really want to figure it all out, so opted just to replace the board. After doing all this I checked out another e-mail account and realized that Fred Holder gave me Charles Woodruff's name. Evidently, he is repairing the controls that Denver had made for those who need it. I don't think he'll mind so here is his email for reference to Woodfast owners. woodco74@gmail.com

Mike

Re: Back in the saddle

#5

Re: Good news, but for the rest of.....

Lee Buck

>Mike, Thanks. My Woodfast still works fine but I'm glad to have the info.