Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Coolibah?

Posts

Coolibah?

#1

Coolibah?

Brent Smith in Montreal

>Can anyone give me some feedback on turning this wood? Bowls, spindles whatever. I was looking at some good size pieces at my local suppliers this morning.

Re: Coolibah?

#2

Re: Coolibah?

Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f

>This is a relative of Cocobolo and has many of the same characteristics. It is oily, hard, has beautiful color, which will oxidize with age, and is likely to cause allergies. So, use a good dust mask and cover your skin. It is subject to cracks from the pith -- but I suspect it is from a load of wood that was imported to Maniwaki a few years ago, it should show any pith cracks by now. I have made bowls, weed pots and bottle stoppers from it and the wood is very beautiful. Another member of our woodturning club has turned quite a number of vases that were spectacular. Although it is hard, it turns well and even scrapes well -- like Cocobolo. You should be able to get a finish from the tool that almost eliminates sanding (which is just as well, as the dust seems to get everywhere).

Re: Coolibah?

#3

Re: Coolibah?

Norm Smith

>Bill,

If you dont mind telling me, Who is the supplier in Montreal?

Norm

Nova Scotia

Re: Coolibah?

#4

Re: Coolibah?

Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f

>I believe Langevin et Forest had some of it. A whole container of it came into a flooring mill in Maniwaki from Central America. The chap sold heavy equipment to sawmills there and had them fill the containers with Cocobolo so they would not be sent back empty. As a result, he set up the flooring mill. But the Coolibah has an orange tint to it when fresh and definitely could not be mixed in with the Cocobolo. As a good entrepreneur, he put out word of this "rare opportunity" to the furniture makers and woodturners around the region. It took him a while, but I think he got rid of all of it and made a bit of a profit. I know some of it made its way to Montreal.

Re: Coolibah?

#5

Re: Coolibah?

Rick_Allen

>The Coolibah I am familiar with is from Australia. The wood is very hard and brittle. The wood cuts well with sharp tools and and unhurried pace to the tool. The wood sands slowly buy sands to a very high luster. The wood is dry and dusty to work with. The wood can hold a lot of detail.

The burls are spectacular with many many eyes.

Re: Coolibah?

#6

Ack!!

Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f

>Ack, Rick, you are right. I was thinking of Camatillo Darn, that is frustrating when you make a mistake. (Of course, that was not quite the language I used on mlyself.)

Re: Coolibah?

#7

Re: Coolibah?

Brent Smith in Montreal

>That where it was. Was, as I say, I bought the 4 pieces they had. It was marked just as "Bois Exotiqe" (exotic wood). It was another customer who told me he thought it was Coolibah. I did some research and it appears to be 'Ring Coolibah'. It was apparently bought from another dealer as it still had their price sticker on 1 of the pieces. I couldn't make out the dealer name. Langevin and Forest are good at carrying a wide selection of exotics, but they don't always know what they have. I put this down to staff turn over. I've bought some beautifully figured wood there at regular prices, and believe me at the prices they charge if they knew what they had it would have been more expensive.

Re: Coolibah?

#8

Guys

Brent Smith in Montreal

>These pieces appear to be at least a few years old. I had to recoat 2 of them as the wax was flaking off. Can I expect much movement from the larger pieces after roughing out my bowl shapes? Two of them are about 12"X4", and the other 2 about 3"X3"X12".

Re: Coolibah?

#9

Re: Guys

Norm Smith

>Brent,

Thanks for the response. Good luck. Would love to see what you turn from this wood.

Norm

Re: Coolibah?

#10

Re: Guys

Rick_Allen

>The Coolibah I had was bone dry. I cored and finished turned the Coolibah I had.