Wild Hare: Tight Rope Walker #1 Done
charlie belden
>Did a nicer base - with 6 coats of garnet shellac - leveled and followed by 5 or 6 spray on coats of lacquer. Turned new upright supports (candle stick holder type things) and dyed them with Behlams. Also turned another finial/flame for one of the "candles", turned african blackwood pegs - one for the right "tight rope" collar and another as a bottom stop for the left "tight rope" collar. Both pegs can be removed to allow the "candles" to be removed from their "candle in order to remove the ornament. Also now hold the "tight rope" in the moveable "collar" with a couple of knots - so the "tight rope" can be replaced if need be.
Since, if anything goes wrong for this piece's owner, I'm probably going to be the person who fixes it, I want to make repair and replacement of parts as easy as I can, and still have the piece hold together in use.
I either need to get a much larger seamless background, or not making any more pieces this large. And even though I used two 500 watt photo floods - with bounce light umbrellas, I still got two "eyes" on the ornament body. May have to add a 3rd photo flood, with bounce light and spend some time arranging them in order to get rid of the hot spots.
It seems that being able to turn interesting things is no longer enough. Now you also need to be a decent to good photographers as well - sigh.
And with pieces that have actual movement, a video is also required - which means having to become a decent videographer too. Then, the video needs a sound track - so add audio engineer and musician / composer to the mix of needed skills. So I'm getting better at I Movie and Garage Band. Now I just have to figure out how to synch the sound track to the video. SIGH!
If holograms become required I'm hangin' up the lathe!
Comments, suggestions and constructive criticism welcomed.



