Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Wheel Chair Turners *LINK*

Posts

Wheel Chair Turners *LINK*

#1

Wheel Chair Turners *LINK*

Jerry Hall

>A few weeks back I got a lot of nice ideas here to setup a jet mini for our County fair so that wheelchair users could give turning a try.

The link is to a slide show of the event, showing the prototype I settled on, mounted to two workmates, lathe slanted, on a pivot, and height adjustable with shims under the table next to the cleats clamped to the workmate. This may lead to some classes for the local wheelchair user community.

What several of us found was that it was really relaxing to turn sitting in a wheeled artists chair. It also worked great for several hands-on sessions with youngsters. Since they had no preconceptions, I had them turn left and right handed which worked great for access to the work. I may keep this setup this way in my shop! But it does take more room.


img

Nevada County Fair - Turning Booth

Re: Wheel Chair Turners *LINK*

#3

Re: Wheel Chair Turners - better links I hope

Cyril Griesbach

>Kudos to you, Jerry and to the Gold Country Woodturners. Very nicely done.

Re: Wheel Chair Turners *LINK*

#4

Re: Wheel Chair Turners - better links I hope

Hal Taylor

>I hope you have more pictures to share. I would like to see how your set up was. I'm sure those of us with weakening legs will be quite interested. Thanks.

Re: Wheel Chair Turners *LINK*

#5

way cool- congratulations on a job well done.

john lucas

>

Re: Wheel Chair Turners *LINK*

#6

Construction and Design Details *LINK*

Jerry Hall

>I annotated a new, smaller slide show showing how this prototype was set up. But a really slick permanent shop solution, and other good ideas was presented in an earlier discussion:

http://www.woodcentral.com/cgi-bin/turning3.pl?frames;read=210715

Thanks for the comments. We had a blast. Very rewarding.


Workmate based sit down lathe stand

Re: Wheel Chair Turners *LINK*

#7

Re: Construction and Design Details

charlie belden

>Jerry:

Great idea, nice execution - and another fine example of the inclusiveness of turning - the Big Tent idea - that is working so well - in no small part thanks to folks like you.

Re: Wheel Chair Turners *LINK*

#8

Re: Construction and Design Details *LINK*

Bruce Lane

>This is a very cool way to introduce those with issues preventing them from standing to the world of woodturning. Here is a link to some information on a more permenent sit down lathe. Once you get them hooked with the portable rig, you can reel them in with the more permenent rig.

Very nice!

http://www.huntcountywoodturners.org/ClubProjects/SitDownLathe/tabid/309/Default.aspx


Sit Down Lathe