Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

OT: Epoxy or Gorilla Glue

Posts

OT: Epoxy or Gorilla Glue

#1

OT: Epoxy or Gorilla Glue

Cyril Griesbach

>I've got to extend a 4x4 deck post with cedar to pressure treated. My plan is to use four 3/8"x4" dowels about 3/4" in from the corners. I'm limited by access to only one side of the lower treated 4x4 and plan to also use a steel plate on that side. The post will be covered with a composite sleeve. Would Epoxy or Gorilla glue be best for gluing in the dowels or doesn't it matter?

Re: OT: Epoxy or Gorilla Glue

#2

Re: OT: Epoxy or Gorilla Glue

Bruce McElhaney, Spring Lake, Michigan

>Do you plan to turn it?

Re: OT: Epoxy or Gorilla Glue

#3

Re: OT: Epoxy or Gorilla Glue

Bill Howatt

>If the dowels fit tightly in the holes either will work. Since the joint will be essentially weatherproof either will work. The reason I say these 2 things is that I made 2 3' diameter wagon wheels with spokes. One wheel was done with epoxy and the other with polyurethane glue. Where the spokes did not make a tight fit in the hole in the rim, the epoxy was an obvious winner after a few years. Polyurethane glue is not a gap filler.

Bill

Re: OT: Epoxy or Gorilla Glue

#4

JL

Re: OT: Epoxy or Gorilla Glue

JL

>I have used Gorilla Glue. I prefer using epoxy for outdoor purposes though.

Re: OT: Epoxy or Gorilla Glue

#5

Re: OT: Epoxy or Gorilla Glue

Russ Faifield

>I would use epoxy because it doesn't require clamping, fills gaps better, and has a stronger bond. Gorilla requires clamping, otherwise the expanding glue will pull the joint apart and the foam is a weak joint.

Re: OT: Epoxy or Gorilla Glue

#6

Re: OT: Epoxy or Gorilla Glue

john lucas

>Personally I haven't found anything gorilla glue will do that either epoxy or wood glue won't do at least equally well if not better and they are much easier to clean up. Epoxy will fill gaps where gorilla glue won't. You can change the cure time of epoxy for longer assembly times.

Re: OT: Epoxy or Gorilla Glue

#7

I probably don't understand...

Thad

>...and am open for the education.

I may not be understanding the application properly, but I would probably consider using an appropriately sized hanger bolt myself.

~ Thad

Re: OT: Epoxy or Gorilla Glue

#8

I would use epoxy if it were me

keith zimmerman, Normal IL

>

Re: OT: Epoxy or Gorilla Glue

#9

Re: OT: Epoxy or Gorilla Glue

Cyril Griesbach

>Thanks to all. Epoxy is what I used and when it's cured I'll be adding two steel plates as well.