Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

rain drops

Posts

rain drops

#1

rain drops

Richard Fulner

>HELP was at a craft show yesterday and we got a few sprinkels and any of my pices that had the rain land on them now have spots that will not come off there where several different finishes on them and all buffed with beall system. i've tryed to buff them again but the spots still remain had to re sand them to get the spots off an i doing some thing wrong I would hate to have this happen to a someone that bought them

Re: rain drops

#2

Re: rain drops *LINK*

Rick_Allen

>The links may be of help.

http://www.wisegeek.com/how-do-i-remove-water-marks-from-wood.htm


How to remove water spots on wood

Re: rain drops

#3

Re: rain drops

Texian

>Have read that carnauba is bad about getting water spots. Others say that Ren wax is better.

Re: rain drops

#4

Re: rain drops

Bruce McElhaney, Spring Lake, Michigan

>Carnauba wax will spot when exposed to rain, and those spots are difficult to remove. I had the same problem doing art shows and stopped using carnauba wax altogether. I now use Renaissance wax to prevent that problem, plus it eliminated the fingerprint smugging problem as well.

Re: rain drops

#5

+1 Renaissance Wax, ditch the carnuba

Scott in SoCal

>+1 Renaissance Wax, ditch the carnuba. I've buffed out water spots before by re-buffing with a dry (don't add fresh wax) carnuba wheel with enough pressure to get it warm. Don't try this on a fragile/thin turning. Sometimes a solvent based wax like renaissance or johnson's will partially soften the carnuba and let you buff out a spot.