Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

New tool from Mike Hunter

Posts

New tool from Mike Hunter

#1

New tool from Mike Hunter

john lucas

>I'll bet that got your attention. Actually it's one of his new products that you can get at Woodcraft. It's an Ice Cream spoon and comes with the brass Ferrule. I've been working on the car this afternoon and had to take a break to ease the frustration so I turned this.

Mike spent the weekend with me and we had a ball playing with his carbide tools. I haven't been using them much lately and forget how clean they cut. When I pull out more of that box elder I will have to let the Hunter tools see how they will do with the tearout prone log. I was cutting really dry Hackberry which can also give you fits and the tools cut extremely clean. 220 easily sanded the wood and 400 probably would have with just a little more effort.

This photo was really tough to get. I put it on a stool in my kitchen, set the camera to Tungsten and shot it hand held at 1/5 second at f 5.6. This image stabilization in the lens is incredible. I did have to add a few points of magenta to take away the slight greenish cast but that was all.


img

Re: New tool from Mike Hunter

#2

Re: New tool from Mike Hunter

Bob Macgregor

>So, does that scoop have a carbide lip? Sometimes ice cream gets really hard.

BOB

Re: New tool from Mike Hunter

#3

wow, that's a huge hollower....

mike in vt

>with a real short handle. Can't see how you could manage controlling the torque with such a short handle.

Nice scoop John.

I pulled out my Hunter over the weekend as well. I finally mounted a piece of desert ironwood that I dragged with me all over the country (from Phoenix to Cortez to Alaska then Vermont) over multiple years. I couldn't part with it, just couldn't figure out what to do with it. This wood came from the Mexican desert when I went for a vacation on the Gulf of CA. I believe it may be the same wood mentioned in an earlier post regarding Texan Ironwood. Very dense and hard, dark almost black. I got it from a Yaqui (sp?) Indian who was using a naked circular saw blade to carve it and sell the results to tourists. I believe it may have a lot of silica. I started on it using Thompson tools, but could not get a real clean cut, and had to keep making trips to the grinder when I decided to pull out the Hunter. BIG difference. The carbide worked like a dream, and by using it as a cutter (rather than scraper) it left a nice smooth surface, even when cutting through knots. I haven't started to hollow this out yet, but you can bet the only tool that will touch it is the Hunter.

Re: New tool from Mike Hunter

#4

Re: wow, that's a huge hollower....

john lucas

>I just turned some desert ironwood this last week. I didn't have any trouble turning it with a Thompson gouge. It's a lot like turning Mexican Bacote. I love the color, it's really nice looking wood.

Re: New tool from Mike Hunter

#5

ironwood

mike in vt

>I had my chunk (8"d x 4"h) mounted in bowl orientation with the pith still included. There are a lot of voids around the pith from drying as well as several cracks. There were also some funky swirls in the grain a a couple of included knots. I think the combination of the orientation, knots and voids was just too much for the Thompson tools to cut cleanly. I believe the wood will be fine once turned as the wood has been drying for years and I plan on filling the voids and cracks with colored epoxy.

mike

Re: New tool from Mike Hunter

#6

So, that's what his scoop looks like.

keith zimmerman, Normal IL

>

Re: New tool from Mike Hunter

#7

Mike Stafford

Can you sharpen it on the Wolverine?

Mike Stafford

>Pretty work, John.

Looks like Christmas presents to me....HO HO HO.

Re: New tool from Mike Hunter

#8

you need the oneway spoon jig :)

john lucas

>