ASH COWBOY HAT
Dennis Bilevich Prescott,AZ
>Cowboy Hat was turned out of Ash Wood which I had received from my brother in California. The hat measures 16 � inches diameter and is 3/64 inches thick. The band is blackened by rubbing Ebony on the hat band on lathe at high speed.
This is my third try without breaking it at the rim. The hat fits me perfectly. I used water spray while turning and light to gauge the thickness. I also used the Keith Tompkins Gage�t . The Gage�t is a must when turning this thin.
All comments welcome



