Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Cyanoacrylate Glue Burn

Posts

Cyanoacrylate Glue Burn

#1

Cyanoacrylate Glue Burn

Barry Turner

>I turned some wooden eggs as an exercise. One of the eggs had a flaw and I decided to flow in some cyanoacrylate glue to repair it. A bit too much glue went in and overflowed onto the surface. I quickly grabbed a towel to wipe it off. My thumb quickly glued itself to the towel. At the same time, my thumb became very hot. I quckly jerked the towel away from my thumb and removed the glue residue from my thumb with de-bonder. I now have a small blister on my thumb caused by the heat generated by the chemical reaction of the glue's curing process. Be careful with this stuff!

Re: Cyanoacrylate Glue Burn

#2

Re: Cyanoacrylate Glue Burn

john lucas

>Barry I had that happen the other day also. It hurts. CA on a paper towel will heat up very quickly, especially when it is in contact with your skin. The better choice is some sort of plastic as a spreader but of course this isn't very good for wiping up an excess of epoxy. I use paper towels because that is what I use to spread my lacquer so it's always handy. I fold the towels into about 4 thicknesses when I need to spread or wipe epoxy and most of the time it works. When it doesn't it gets your attention really fast.

Re: Cyanoacrylate Glue Burn

#3

Re: Cyanoacrylate Glue Burn

Barry Irby

>My girl friend knew I used CA on lathe projects. One of her artificial nails came use and she asked if she should use some glue on it. Sure. When I hit it with the accelerator, it cooked off. Last time she asked to borrow my CA.

Apparently the kind they use in medicine and for cosmetic stuff does not generate heat.

Re: Cyanoacrylate Glue Burn

#4

Re: Cyanoacrylate Glue Burn

Barry Turner

>Oh, gad! That's what I do all the time. Back in the winter, I kept splitting my thumbnail and a fingernail down the middle. In cold weather, old people's nails get brittle, or, so I hear. Anyway, I kept gluing them back with CA glue. Worked like a charm. No heat either. I did not use accellerator. Maybe I just got lucky.

Re: Cyanoacrylate Glue Burn

#5

Re: Cyanoacrylate Glue Burn

Barry Turner

>This was an old terry cloth towel, but it heated up just the same. The amount of CA was very small, probably not more than a drop. I've glued fingers before, but never got burned previously.

Re: Cyanoacrylate Glue Burn

#6

Dennis in Southern Oregon

Re: Cyanoacrylate Glue Burn

Dennis in Southern Oregon

>I use the back side of used hook and loop sanding disks to spread CA glue. It is a synthetic fiber and does not seem to catalyze the glue.

Dennis

Re: Cyanoacrylate Glue Burn

#7

Re: Cyanoacrylate Glue Burn

Barry Turner

>I usually manage to keep the stuff off my hands........but that's not always possible. I think I'm just gona start wearing rubber gloves whenever I handle the stuff. Better safe than sorry.