Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Cigar Pen Failures

Posts

Cigar Pen Failures

#1

Cigar Pen Failures

Marianne

>Hello,

First - I will admit I buy pen kits that are not expensive. Normal retailers are at about $7.00 a pop. Several of my cigar pens are exhibiting the same failure signature: when you press down to write you see the top part of the pen rotate and the pen tip goes up inside of the pen. I have used these pens heavily for two years now and they have the same failure signature. Before performing a DPA does anybody know what is causing this? Has the copper insert in the top part of my pen come loose and I need to do a better glue job? Thanks for any info. Marianne (and really do not want to perform a pen autopsy as these pens are my favs)

Re: Cigar Pen Failures

#2

Re: Cigar Pen Failures

Jim Shaver - Oakville, Ont, Canada

>Hi,

I will ask, I make about 180 of these a year, have you pulled the top off and checked that the transmission is screwed down fully?

Also if the top barrel is short in any way I have found when you press the pen together that you will see a gap at the waist, the pen should still work, but if the transmission is loose it will spin,

Just my experience,

Take care,

Jim

Re: Cigar Pen Failures

#3

Re: Cigar Pen Failures - Solved.

Marianne

>Hi Jim,

Thanks for responding - pulled it apart and everything was screwed in tightly. Inserted the "bad" pen cartridge and it worked just fine in the good pen. Put the good pen cartridge into the "bad" pen and now it would stay locked but would not retract!

So my husband and I started comparing between the good and bad pens. He noticed the "bad" pen - the pen point was not coming through the nib centered but was coming up off centered. It appears that there was some debris in the tip that was causing the pen not come all the way up and lock. He took some 600 grit and and ran it through the nib - pen works perfect! Marianne