Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Cleaned the shop

Posts

Cleaned the shop

#1

Cleaned the shop

john lucas

>After all that bowl roughing and finish turning I had to stop and clean the shop. I took out 9 garbage cans full of shavings. I've got to put up the curtains to contain the shavings. My next shop will have a grid floor. Underneath will be a giant funnel and all the shavings will fall into a collector. Then in the winter they will be force fed into a furnace to heat the shop.

Or maybe I will simply build on a hillside and have a blower that spits the shaving out into the wind to cover the ground and trees like Brown and white Kudzu.

Re: Cleaned the shop

#2

Steve Kubien

Outdoor shop

Steve Kubien

>I think it is John Williams who made an outdoor lathe in Kingston Ont. Makes sense to me!

Re: Cleaned the shop

#3

Jerry Louden

Re: Cleaned the shop

Jerry Louden

>John, you will need a good supply of screws and other lathe parts that will fall through the floor along with the shavings. When the kids were young, I always said that the eating area in the kitchen should be a slotted floor so all the table spills would go through. They grew up too fast for me to get around to doing it.

Jerry

Re: Cleaned the shop

#4

Termut

Charles Yawn

>I think someone ought to breed a dog and termite so we could have a shop dog companion that just happens to eat wood products.

Re: Cleaned the shop

#5

Re: Termut

john lucas

>Mine takes scraps from the shop and leaves them in the yard so you get to fire them at neighbors when you mow the lawn.

Re: Cleaned the shop

#6

Re: Cleaned the shop

Jim Canning

>Grid floor!!! Thats it, just what I need.

Maybe it could be patented$$$

Re: Cleaned the shop

#7

Re: Cleaned the shop

Chip in Plano

>I've had the same grid floor thought. I really need to put up the curtains as all my cabinets/shelves are open and I have a bad habit of leaving containers, boxes, tool boxes, etc. open which means they quickly fill up with shavings. At least the curtain would contain things better....But they need to be clear plastic so I don't get claustrophobic.

My ideal setup.....I once saw a picture of a guy turning on a big old lathe outdoors on a covered deck overlooking a magnificent scenic view atop a mountain. A really idyllic log cabin. The lathe was situated about 3' from the deck corner. He had a heating lamp overhead for the winter. Ceiling fans for the warm times. Heavy clear plastic rollups for inclimate weather protection. Swept everything off the deck to the ground below. Off the front was wood for mulching. Off the side was a hopper to feed a wood burning stove and smoker. He even had a winch setup to hoist big chunks up to the deck and swing it over the lathe for mounting. Only thing I didn't see was a hammock and a big screen.

Re: Cleaned the shop

#8

Re: Cleaned the shop

Don Orr

>What is this "cleaned" you speak of ? I am not familiar with this term. Enlighten please ;-))