Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Wild Hare Idea - Tight Rope Walker 1: Progress

Posts

Wild Hare Idea - Tight Rope Walker 1: Progress

#1

Wild Hare Idea - Tight Rope Walker 1: Progress

charlie belden

>In another attempt at a piece with actual movement I've been playing with the idea of a piece strung on monofilament line connected to verticals with turned elements on the ends, one end of the line moveable up and down. It's a familiar idea - the little toy clown on the unicycle who rides back and forth on a tight rope.

Could go with a familiar traditional turning idea - or a turned clown. Was leaning towards the clown idea but once I got out some wood and started turning I of course went the other way - a more elegant piece. The inconguity of a semi-formal, somewhat delicate piece, sliding back and forth on a tight rope seemed as if it would add an inconguous HUH? to the piece.

To add to the confusion, the top finial is in a ball and socket joint - with an internal counterbalance - so as the body rocks left/right and fore/aft, the finial will always remain vertical. It's not obvious that that's what's happening, but the mind will pick up on the fact that something "just ain't right" well before the logical part of the brain identifies what "ain't right".

The finial and bottom "icicle" are african blackwood, the top "collar" is probably bubinga and the body - just something I had that was about the right size.

If I can get the balance on this thing right I'll do columns on both ends, one with a hole through it for a spring that will control the up and down movement of one end of the tight rope. Will do africal blackwood base and cap for the uprights and "up/down" handle.

As always, comments, suggestions and constructive criticism welcomed


img

Re: Wild Hare Idea - Tight Rope Walker 1: Progress

#2

Re: Wild Hare Idea - Tight Rope Walker 1: Progress

Rick Allen

>Ditch the hole. Two dangling icicles with the tight rope setting between the icicles. A fair "V" to those icicles will give better balance and maintain an upright position with a wider range of motion.

Instead of a hole make it a hook so the tight rope walker can be removed from the contraption without needing to threading the thing.

Instead of a tight rope (monofilament or string) make a thin piece of wood which can be flexed so the motion can curve (instead of just up and down you could include left and right in the motion).

The tight rope walker needs to be removable so it can be examined. This also permits the tight rope walker to be independent of the tight rope (or rail) and the tight rope become independent of the tight rope walker. You could make a variety to tight rope walkers, each with slightly different qualities. You could have different tight ropes or rails each with different qualities. A person could purchase one walker and one tight rope. Latter they could add to their collection with a new tight rope or tight rope walker.

By making them separate you are making components which may lead to other components not yet considered.

How about a slack string rimed wheel which the walker would ride on as the wheel turned.

Re: Wild Hare Idea - Tight Rope Walker 1: Progress

#3

Re: Wild Hare Idea - Tight Rope Walker 1: Progress

charlie belden

>Rick wrote

"Ditch the hole. Two dangling icicles with the tight rope setting between the icicles. A fair "V" to those icicles will give better balance and maintain an upright position with a wider range of motion."

TWO icicles? In a V? I have enough trouble getting one centered icicle.

"Instead of a hole make it a hook so the tight rope walker can be removed from the contraption without needing to threading the thing."

Should have checked this board BEFORE I drilled the hole - sigh.

I bought, and was ready to go with, one of those necklace spring clasps that's allow the piece to be removed and reinstalled - and - being polished silver, would provide minimal contact surface and therefore less friction. But if I used it, it'd preclude the bottom icicle/counter balance - and turning them is fun.

If I do go with the necklace clasp thing that'll necessitate outriggers which will make the piece obviously not "traditional" looking.

"Instead of a tight rope (monofilament or string) make a thin piece of wood which can be flexed so the motion can curve (instead of just up and down you could include left and right in the motion). "

Since this idea requires audience participation, it has to be somewhat sturdy / idiot proof. Thin plus Wood plus Audience Participation seems like an opportunity for OOPS, It Broke!

"The tight rope walker needs to be removable so it can be examined. This also permits the tight rope walker to be independent of the tight rope (or rail) and the tight rope become independent of the tight rope walker.

The Pendulum Finial of this one sort of precludes actual handling of the piece since it sits in a socket - with a wire out the bottom on the end of which is its counter balance".

"You could make a variety to tight rope walkers, each with slightly different qualities. You could have different tight ropes or rails each with different qualities. A person could purchase one walker and one tight rope. Latter they could add to their collection with a new tight rope or tight rope walker.

By making them separate you are making components which may lead to other components not yet considered."

Great idea! I can see that having multiple Walkers which the "audience" can set on the rope could add interest and participation to the piece and perhaps a bit of a learning experience - different shapes and placement of outriggers making one more stabile than another, one barely stabile, but more dynamic - and perhaps more intersting to play with.

"How about a slack string rimed wheel which the walker would ride on as the wheel turned."

I'm not getting the idea. Rick, could you expand on this idea a bit more please?

Re: Wild Hare Idea - Tight Rope Walker 1: Progress

#4

Steven Antonucci

It's a small world after all...

steve antonucci

>I'm dropping a hint for you, but it's been done before. Think back to your last visit to the mouse and look up overhead at the tightrope walker if you want to know how to "level-up" the idea.

Steve