Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Turning box elder

Posts

Turning box elder

#1

Turning box elder

john lucas

>I started the 4 box elder bowls I have to turn. Here I am roughing out the next 2. I'm using the new Mcnaughton coring system to turn rough out the bowls. This one started as a 19" bowl but has a punky area that I keep working on. It's now down to about 18". I've soaked the bad areas with lacquer so hopefully tomorrow I can take off another 1/8th to 1/4" and start my coring.


img

Re: Turning box elder

#2

first 2 bowls

john lucas

>These are the first 2 bowls from the 18" blank. I could have cored another one but the first coring didn't have any red color so I decided to just hollow it and only get 2 bowls. The next blank has better red. I'll see tomorrow. Hopefully I will 3 out of that one.


img

Re: Turning box elder

#3

Steve Kubien

John, John, John...

Steve Kubien

>I know you must be having a load of fun but you will do so for a lot more years if you put a shield on. C'mon, be a good influence to us newbies!

Respectfully,

Steve

Re: Turning box elder

#4

Re: Turning box elder

DennisBilevich

>Hay John I like your face shield

Re: Turning box elder

#5

Re: first 2 bowls

mfoster

>Nice bowls John. I like the shape (what I can make of it) with the foot and rim. How oval do you suppose these will go. I always debate doing once turned vs. twice turned bowls. Do your customers mind the oval form of turned wet bowls? just curious about your experience.

Mike

Re: Turning box elder

#6

Re: Turning box elder

DennisBilevich

>Steve you beat to it

Re: Turning box elder

#7

Re: first 2 bowls

john lucas

>I don't sell a lot of bowls, and all of them have sold so it's difficult to answer your question. Most green bowls I turn to finish are natural edge so the customers don't know they've gone oval.

Personally I prefer to twice turn bowls because I like round. Most of the older "antique" bowls that I've seen in shops or peoples homes have been turned green and are oval.

I am doing these this way because the lady doesn't want to wait 3 month or longer to get them. I don't subscribe to the Alcohol, soap etc methods. Just seems like too much trouble and mess.

These are 1/2" thick so they will be dry in a few days. I'll post photos of how much they warp. I put the center of the log toward the top so it will rise at that point. I like Bill Luce's series of bowls like this but his are deeper with a different shape. We'll see.

Re: Turning box elder

#8

Re: John, John, John...

john lucas

>Did you notice that I was out of the line of fire? I do wear the face shield when roughing because I'm throwing shavings everywhere including my face sometimes. I hate those things, I can't see out of them, you have to stop and clean them, etc, so I remove it when I'm finished roughing because I can do the finish cuts while standing to either side of where it would throw a piece if it explodes.

If I have any doubts about the soundness of the wood the faceshield goes back on. This was also a set up just for the photo. You don't want my ugly mug covered up do you. :)

Re: Turning box elder

#9

Line of fire! No such thing

Don Evans

>Sorry John, but the term "line of fire" is a myth.

I've only been hurt once on a lathe way back in 70's, learn my lesson I was not in what some refer to as the line of fire.

When that thing comes apart, it goes every where, it hits the tool rest and then it is anyone's guess where it is going next.

I got nailed just below the hair line on my forehead. Went straight to my knees, home alone, when I finally opened my eyes there was blood everywhere, floor, hand that was holding the head. Though I was gone for sure.

Now that I think about it, I was standing just where you are in the photo of you turning these bowls.

Be safe.

Don

Re: Turning box elder

#10

Steven Antonucci

Better paint your door (blue background ;-P)

steve antonucci

>There are some days where all that I want to do it throw shavings while roughing out a wet piece of wood... looks like a good deal of fun.

I think I read somewhere that if you bleach it, the red will pop? Any scraps to test that theory?

Steve

Re: Turning box elder

#11

I wondered how long it was gonna take

Paul Zerjay

>

Re: Turning box elder

#12

Bleaching box elder

john lucas

>I have tested it. I was lucky enough to assist Bin Pho during a class and he bleaches much of his box elder. I tried it. I doesn't change the red at all but it lightens the white wood so you get more contrast. I turn plain box elder and then bleach it so that it's very white all over. It looks great.

Re: Turning box elder

#13

Steve Kubien

Re: John, John, John...

Steve Kubien

>Covering up your ugly mug? Ummmm....

I know what you mean about faceshields. I hate them too. A necessary evil I'm afraid.

Actually, I DID notice your stance/position as it relates to the line of fire. Better than I am much of the time.

Hey, you know I am yankin' your chain to a large degree, right?

Cheers,

Steve

Re: Turning box elder

#14

Re: Turning box elder - cool post

Ray Carson - Lawrenceville, NJ

>I love the shavings piled up against the door. LOL Bowls have nice shape. Very nice.

Ray

Re: Turning box elder

#15

Yank away :) I'm a big boy.

john lucas

>

Re: Turning box elder

#16

What's with the bowling ball?

Rick Davenport

>Is that a bowling ball I see in the corner?

Did you turn it?

I'll bet the finger holes were a bearcat!

How did you mount it?

R