Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

smoke detectors/fire safety

Posts

smoke detectors/fire safety

#1

smoke detectors/fire safety

Lynne Yamaguchi

>I converted my home's attached garage to a workshop and want to install a smoke detector in the shop. I'm worried, though, that if I install standard photoelectric and/or ionization detectors (which are based on detecting particles), I'll get a lot of false alarms from sawdust. Do any of you have experience with this? Is sawdust not a problem with standard detectors? Does anyone use heat detectors instead? Any specific recommendations?

Re: smoke detectors/fire safety

#2

Re: smoke detectors/fire safety

jwoodwright

>If you went with heat detectors, you would need both types. Rate-Of-Rise (ROR) and Fixed Temp. The ROR would alert to a fast burning quick rise in temp. The fixed temp would alert on a slow burning or smoldering fire.

I have gas heat and water heater in the garage. I have a Carbon Monoxide Detector with readout and a Photoelectric Smoke Detector in the garage. We also have Carbon Monoxide Detector upstairs by the bedrooms and plenty of hardwired, battery back-up Smoke Detectors.

The smoke detector is a pain if you rip some hardwood and get some "smoke"... Just clear it out with compressed air.

Ionization detectors are great for fast burning fires that produce fine particulate... Slow burning large particulate aren't easily detected. This is why they shouldn't be installed in kitchens, too many Toaster alerts...

The worst thing is having none. Far too many people have been lost to fire, due to lack of detectors and removed batteries...

Re: smoke detectors/fire safety

#3

Re: smoke detectors/fire safety

Lynne Yamaguchi

>Thanks for taking the time to respond. I definitely will get the combination heat detector. Does sawdust also set off the photoelectric smoke alarm, or just the ripping (which I do do a little of)?

Re: smoke detectors/fire safety

#4

Re: smoke detectors/fire safety

jwoodwright

>You're welcome. Haven't had any sawdust or sanding dust alarms. I do have a Jet Air Cleaner and use it when sanding.