Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Nova 3G or Grizzley Chuck??

Posts

Nova 3G or Grizzley Chuck??

#1

Nova 3G or Grizzley Chuck??

Joe Meirhaeghe

>So the other day I asked which chuck to buy: a Grizzley for about $114. Delivered or a Vicmarc Vm100 for about $250 delivered.

Now I see where I can get a Nova 3G chuck for $119. delivered.

It's to use on a Rikon mini lathe with a 12" swing so you know it won't see anything super heavy or to large.

So whats everyones thought on the Nova 3G chuck???

Re: Nova 3G or Grizzley Chuck??

#2

Re: Nova 3G or Grizzley Chuck??

Jerry McCaffrey

>First chuck was a Nova G3 and went on to buy other Technatool chucks. Been real happy with the G3 and it is way better than the PSI and other cheap chucks that I've used. Perfect for a minilathe up to 12".

Re: Nova 3G or Grizzley Chuck??

#3

Re: Nova 3G or Grizzley Chuck??

Ed Wujciak

>I got a G3 as part of the package when I got my 1624-44. Perfectly fine smaller chuck and the price is good. You will need an adapter to your spindle size. If your lathe is reversible, make sure the adapter has a locking screw so it doesn't unscrew on you. Teknatool makes some with and some without. DAMHIKT.

Re: Nova 3G or Grizzley Chuck??

#4

Re: Nova 3G or Grizzley Chuck??

Jim Sebring

>I have three G3s, each with a different set of jaws. I use all of them on my Nova DVR xp (16 inch swing.) I haven't turned any bowl over 10 inches in diameter, yet, but wouldn't hesitate to rotate bigger stuff on a G3. The open back makes it easy to clean the dust out of the scroll gears. I also have two Super Nova 2s I like to use for heavier stuff - one has the power grip jaws that really hang on tight.

As mentioned above, you will need to buy an insert to fit the G3 to your spindle. The best price I've seen seems to be around $22 at Woodcraft.

Re: Nova 3G or Grizzley Chuck??

#5

Re: Nova 3G or Grizzley Chuck??

Phil Stivers in So. California

>I have two G3's and they indeed are fine chucks. Nothing wrong with them. I have both G3's (small chucks) and Vicmarc's (large chucks). The G3 has jaws available for gripping small work that the other manufacturers don't seem to have. My large chucks are Vicmarcs. The Vicmarcs have an internal rack which is protected from the elements. They don't slip. The G3 with an exposed rack should be tightened on both points to prevent any slippage. I like the Vicmarcs because if you lose the chuck key it is an allen wrench. Not so with the other chucks on the market. Either way you're getting a top quality chuck.