Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

How do I handle this log?

Posts

How do I handle this log?

#1

How do I handle this log?

Brian McKearney------WebKitFormBoundary8mWqAAfa+L9

>I had a few trees removed by the experts today and one of them was a large Silver Maple. It is about 3.5 feet at the base and I have a large piece that looks like it would contain some beautiful wood, but I'm not sure how to handle something this big. My chainsaw only has a 16" bar.

Can this be split with wedges and a sledge hammer? Or should I have the tree guy haul it away when he comes back to clean up tomorrow?

Brian


img

Re: How do I handle this log?

#2

Re: How do I handle this log?

Gary Evans Tallassee, TN

>There are lots of ways to chop that thing up if your saw is capable motorwise. It takes some extra power to cut with the bar buried 16" in the log.

As an example, you could cut pieces 16"x16"x the arc of the log x the length of the log section. They will have an irregular cross-section, but there will be lots of beautiful wood in there. The wood at the base of the tree is usually highly figured, particularly on maple.

Whatever you do, don't let him haul it off! Your local turning club could well have a member with a bigger saw than yours.

Gary

Re: How do I handle this log?

#3

Re: How do I handle this log?

matt overton

>You probably paid the man a good sum to cut the tree down, and he had to have had a big enough saw to cut the trunk. I think you would be well within your rights to ask him if he would cut it into chunks that your saw could then handle. Check out John Jordan's article in woodturning for a great tutorial on cutting up a large hunk of wood into bowl blanks.

Re: How do I handle this log?

#4

Neighbah

Jorge Castaneda~Downeast Maine

>Hi Brian,

Long time no see.

Last year somebody offered me as much as I wanted od a tree of similar diameter. Like you I had a saw with a 16" bar, so I went and got an 18" bar and chain, that did it for most of the trunk, but nearer the base it was not long enough, so I went all around cutting as deep as I could and the finished with the help of an ancient 2 man saw, you know, a long blade with very large theet and a handle on either end.

But the guy that cut it should help you. The crutch pieces have a knock out figure most of the time.

good luck

Jorge

Re: How do I handle this log?

#5

Re: How do I handle this log?

jim miles - Charlote NC

>Yes- get the tree guy to cut it for you. Make him a piece or two out of it very quickly - an investment in future wood he might find for you!

Re: How do I handle this log?

#6

Re: How do I handle this log?

Brian McKearney------WebKitFormBoundary8mWqAAfa+L9

>Thanks everyone. I went back out this evening to assess the situation and get past the feeling of being overwhelmed by the changes to the front yard.

I took a can of spray paint and a tape measure and marked off where I'd like the bigger logs cut. I'll have the tree guy cut those up for me in the morning and then I should be able to handle them from there.

I thought of getting a longer bar and chain for my Stihl 023, but I think that it's a bit underpowered for the task. Once the tree guy chunks up the bigger logs, I should be fine.

Can't wait to see what's inside these logs! Now to find the time to core and rough out all the bowls! :)

Brian

Re: How do I handle this log?

#7

Re: How do I handle this log? *LINK*

Dick Coers

>Might I suggest.............


explosive resawing

Re: How do I handle this log?

#8

now that's funny I don't care who you are

john lucas

>

Re: How do I handle this log?

#9

Re: now that's funny I don't care who you are

Don wilcut

>You got that right! Those guys sure know how to use black powder.

Re: How do I handle this log?

#10

Re: How do I handle this log?

Barry Irby

>I grew up on a farm. We had several large oaks taken down and sawed into logs. They were three feet or more in diameter. My Dad used a Powder Wedge and black powder to split the logs. It was a VERY heavy walled cylinder perhaps a foot long. Outside diamerter was about 2 1/2" and it had an inner diameter of about 7/8". It had a solid end on one end and the other had a smaller nipple sticking out. There was a hole in it for a fuse. He filled it with black powder, Drove the niple into the end of the log, using a sledge hammer and inserted a fuse into the hole on the side of the heavy tube. We leaned a heavy piece fo wood against the "wedge" to keep it from flying away, lit the fuse and ran away fast. I was a kid, but as I recall it split the log into five or six pieces. Very effective.

Re: How do I handle this log?

#11

Steve Kubien

That's execellent!!!

Steve Kubien

>

Re: How do I handle this log?

#12

Re: How do I handle this log?

Bob Lalonde

>Brian, I have an idea. If you will tell me your address, I will get in my truck and drive over. We can then put it the bed and I will leave. You won't to worry about it after that. What do you think. Bob.