Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Power sanding - 2" or 3" pads?

Posts

Power sanding - 2" or 3" pads?

#1

Power sanding - 2" or 3" pads?

wilbur

>I want to give power sanding a try. My bowls so far have been 9" diameter max. I'd love to get some input as to whether I should get a 2" or 3" sanding pad.

Obviously, the advantage of the larger pad is being able to cover more area at once. The disadvantage of the larger pad, I'm guessing, is fitting into tighter curves. But then I learned about innerface pads, and was wondering if a larger pad with a very soft innerface pad can get into a tighter curve.

Any comments would be greatly appreciated.

And here's a bad picture of the last bowl I made, just to give you all an idea of the type of shape I gravitate to.


Re: Power sanding - 2" or 3" pads?

#2

Re: Power sanding - 2" or 3" pads?

Ken

>I have them all an gettin some more.I have the 5"soft pad that I use on larger stuff and love it,In fact I am getting four more,one for each grit.It seems that they will pull apart after a while,so this way I won't have to change the paper,just the whole pad,with different grits.I also have the one,two an three" pads.A few of each.By the way,I love that bowl.That is a beautifull piece.

Ken