Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

St Leger Signature SRG at Thompson Tools

Posts

St Leger Signature SRG at Thompson Tools

#1

St Leger Signature SRG at Thompson Tools

Ed Moore of SW VA

>I purchased a Signature Thompson Tool from Mark St Leger recently. For anyone who does small spindle turning such as finials, ornaments or boxes the St Leger 5/8" Spindle Roughing Gouge (SRG) produced by Doug Thompson of Thompson Tools is an absolute must. It is made from 5/8" round stock and does not have a thin tang like the older SRG's. I put a handle on the tool today and I now have a real gem that I will enjoy using when I make icicles for ornaments. It arrived sharpened (Mark is a good friend of mine) and I immediately gave it a little test drive. Sweet! I checked the angle and it is exactly the same as the angle of the grind I have on a similar SRG. The heft of the tool is just right and as you would expect in a Thompson tool, it sharpens beautifully.

I strongly recommend the St Leger Signature SRG,

Ed

Re: St Leger Signature SRG at Thompson Tools

#2

Re: St Leger Signature SRG at Thompson Tools

Jerry McCaffrey

>Just used mine, purchased last week, for the first time. Yes it is a sweet tool, delicate and beefy at the same time.

Re: St Leger Signature SRG at Thompson Tools

#3

I need a new tool like a hole in the head

john lucas

>but I will probably order one of those and 1/4" spindle gouge from him in a week or so. You guys are costing me money. :)

Re: St Leger Signature SRG at Thompson Tools

#4

Re: St Leger Signature SRG at Thompson Tools

Jennifer@Indy.USA

>Ed I'd love to see a picture of this little beauty. If you get time would you mind posting a picture? I zipped through the trade show so fast last weekend at the symposium that I didn't even SEE Doug's booth let alone check out his new tools or sadly even say hello :(

Hope you had a good weekend Doug!

Jen

Re: St Leger Signature SRG at Thompson Tools

#5

St Leger Signature SRG at Thompson Tools

Ed Moore of SW VA

>Here is a picture of the tool with handle that I made.

Ed


img

Re: St Leger Signature SRG at Thompson Tools

#6

St Leger Signature SRG at Thompson Tools

Ed Moore of SW VA

>Here is a second picture. There are 6 1/8" of steel exposed. The flute is essentially 4" long.

Ed

Re: St Leger Signature SRG at Thompson Tools

#7

St Leger Signature SRG at Thompson Tools

Ed Moore of SW VA

>The picture was too light so I darkened it.

Ed


img

Re: St Leger Signature SRG at Thompson Tools

#8

You were there...

Doug Thompson near Cleveland

>Sorry I didn't see you last weekend :( This was the second year the booth was at the back of the vendor area, next year I'll move up one way or the other. Ellis and a bunch of others wandered far enough to find us... it's good to meet the people that you only know as a name from the internet.

Mark is the only one who has these tools right now so you need to contact him.

Re: St Leger Signature SRG at Thompson Tools

#9

Re: St Leger Signature SRG at Thompson Tools

Jennifer@Indy.USA

>Thanks Ed!

Re: St Leger Signature SRG at Thompson Tools

#10

Re: Right, Ed!!!!

Jamie Donaldson

>

Re: St Leger Signature SRG at Thompson Tools

#11

Re: St Leger Signature SRG at Thompson Tools

Donna Banfield

>Under most circumstances, I would consider using ambrosia wood for a tool handle an OMG mistake!

But when you consider that it's for a Doug Thompson tool, well then, Ed, why didn't you use Cocobolo? Didn't have it on hand, I suspect, and couldn't wait to get some appropriate stock, right? :^)

Re: St Leger Signature SRG at Thompson Tools

#12

St Leger-Thompson SRG Tool Handle

Ed Moore of SW VA

>Donna I assume that you were surprised that I chose a nice wood like ambrosia maple for the handle. And then you realized that this is a very special tool. Mark and Doug are very special people and to do less would have seemed inappropriate to me. I am obligated to each of them in different ways. And I wanted a handle that made the tool easy to locate at a demo.

Cocobolo is for boxes, and it is an irritant. While I may be an irritant to some, I don't want my tool handles to cause irritation. ;^))

Ed

Re: St Leger Signature SRG at Thompson Tools

#13

Re: St Leger-Thompson SRG Tool Handle

Jorge Castaneda~Downeast Maine

>Ed,

I have 3 hand planes made of cocobolo, 2 smoothers and one jack, I have been using them for years, never had any problem, the irritation may be when you are making sawdust.

Re: St Leger Signature SRG at Thompson Tools

#14

Re: St Leger-Thompson SRG Tool Handle

Ed Moore of SW VA

>Jorge,

The cocobolo dust is certainly a problem and should be avoided. The other characteristic of cocobolo is the oil. Is it the oil in the dust that causes a problem? Does continued contact with cocobolo make one more sensitive to the dust?

I simply don't know the answers.

Ed

Re: St Leger Signature SRG at Thompson Tools

#15

Re: St Leger-Thompson SRG Tool Handle

Jorge Castaneda~Downeast Maine

>Ed,

I don't know either, the oil makes it take a wonderful finish by itself, nothing else needed, and in the case of the planes, they glide very nicely because of it, so it is an asset in that application, and as I said, I have used them a lot and never did bother me. Could it be like that some person may get sensitized to it and some other person get "vaccinated" by handling it and avoid being sensitized?

There is so much we don't know

Jorge