Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Private turning lessons 2. WHO?

Posts

Private turning lessons 2. WHO?

#1

Private turning lessons 2. WHO?

Ed Moore in SW VA

>This thread is two-pronged. First, what qualities or experience should an instructor have if they offer private lessons? Second, WHO would you like to take lessons from if money and time were no obstacle?

Ed

Re: Private turning lessons 2. WHO?

#2

Steven Antonucci

I'm guessing they should be good turners?

steve antonucci

>First and foremost, they need to be adaptive. When I started teaching, I thought about what I wanted to do and planned around my experience.

The class was a basic bowl class, and I demonstrated turning a bowl in 15 minutes. I then set everyone (7 people) up with a bowl blank and 2 hours later folks were still cutting on these 6"x3" blocks. The funny part was that I had enough wood to make a salad set for every student. Never once thought that it could take that long, and now I plan for it to take that long...

S

Re: Private turning lessons 2. WHO?

#3

Mike Stafford

Re: Private turning lessons 2. WHO?

Mike Stafford

>I think almost all beginning turners would benefit from time spent with an experienced turner who can teach. Not everyone can teach. I often wish I had had the opportunity to spend time with a good teacher when I was beginning to turn rather than trying to teach myself. I find I am still learning many things when I am around good teachers.

What constitutes a good teacher? Someone with a lot of experience and a good technical background in turning would be a good choice. However there are many self proclaimed teachers/mentors out there who want to teach bowl turning and still turn straight-sided flat bottomed bowls. I am not sure how you would qualify someone as a good teacher. The best turning teachers I have personally seen are Mark St. Leger and Alan Leland. Allan Batty is another great teacher but my time around him has been very limited. You ain't half bad yourself.

Re: Private turning lessons 2. WHO?

#4

Re: Private turning lessons 2. WHO?

Cyril Griesbach

>I've got to agree with Steve and Mike here. I took a workshop with Ellsworth and that was nice. I've also done some hands on classes with some of the outside turners we've brought into the club and in all cases I learned some new things. After seeing a demo with Mark St. Leger I'd like to spend a day or so with him and I'd surely enjoy turning time with Bill Grumbine. I'd sure like to be able to spend lots of weeks at the Campbell school with the likes of yourself, Mr. Moore, Mike Stafford and several others.

Re: Private turning lessons 2. WHO?

#5

JL

Re: Private turning lessons 2. WHO?

JL

>A good wealth of experience and a lot of patience :).

Who: tough one - I do spindles, cause I like them.

Nick Cook

Curtis Buchanan

Jamie Donaldson - combined turning and photography class - I don't do photography very well (I S@%$).

John Lucas - again, combined turning and photography class.

Alan Lacer

Jean-Francois Escoulen

Re: Private turning lessons 2. WHO?

#6

Re: Private turning lessons 2. WHO?

robo hippy

>I did one class with Stewart Batty. I would like to turn with Mike Mahoney, Richard Raffin, Dave Ellsworth, and Big Bill. Of course, I think I would be able to show them a thing or two as well. Just because all of God's children are different, and some of us are more different than others.

robo hippy

Re: Private turning lessons 2. WHO?

#7

took a class with Curtiss- really great

john lucas

>I think I am going to offer an evening of photography during my class at the folk school in March 2010.

Re: Private turning lessons 2. WHO?

#8

Re: Private turning lessons 2. WHO?

Fog Tanner

>They should have a good command of the subject matter and tools. They must also be able to adapt or cope with any problem situation that arises, much as in life. But, they must also be able to present it in a manner that you are able to follow and execute. Not all professional turners are good teacher, even though they have a command of the subject matter and tools in use. The best I have had in the area are Richard Raffan, Mike Mahoney, and Bonnie Klein.

The people that I would like to spend time with would be:

Raffan (again)

Mike Mahoney (again)

Bonney Klein (again)

Escoulen

Re: Private turning lessons 2. WHO?

#9

Cyril, Mike Stafford will ...

Ed Moore of SW VA

>be teaching his excellent box course at John C Campbell Folk School in June of 2010. I am to teach ornaments on November of this year at JCCFS. Mike and I would be DELIGHTED to have you join us for a week of turning and fun. I'll bet that your wife would enjoy these courses too!!

Ed

Re: Private turning lessons 2. WHO?

#10

Re: Private turning lessons 2. WHO?

john lucas

>For me personally the list is a mile long. I'm looking for people who would push my creative limits. Jean Francois Esceuloun, Mike Hosaluk, David Ellsworth, and now of course My feeble brain won't think of others but whenever I look at great work I get excited about working with that person.