Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Using Paua and Abalone

Posts

Using Paua and Abalone

#1

Using Paua and Abalone

Chip in Plano

>I have a request to use paua shell and/or abalone as a decorative element in a platter and bottle stoppers. I'm looking for some insight into using these materials (ie. do they turn, cut, sand, finish?) and sources. For the stoppers, I figured I'd use a pre-cut piece from a cabachon supplier such as Rio Grande.

Not really part of my aethestic taste but it'll be a good growing experience. The iridescent shell look always makes me think of those strange objects d'art found in Alvin Island tourist trinket stores the littered the coast line in the Florida Panhandle....stuff I never ever thought of buying.

Re: Using Paua and Abalone

#2

Ellis Walentine

Toxicity

Ellis Walentine

>As I recall, abalone dust is very bad for you if inhaled. I don't have the science at my fingertips, but I strongly suggest cross ventilation and a good dust mask when working shell stock.

Ellis Walentine, Host

Re: Using Paua and Abalone

#3

Re: Toxicity

Don Evans

>It is messy but the best (safest) way of working it is under water.

Not really good idea to be blowing it around. One thing is that if working with small items, there is a tendency to move close to the work, perhaps magnify glasses etc, that puts you nose too close to be blowing it.

Way I do it is use dust collector and suck air away from me. I made a large square funnel from plexi with dust collector just for carving and working this type material. I need to make a new one and have the material just haven't gotten to it.

For stoppers I found some precut, mostly mother of pearl 1" cabs, soon as I remember where I will tell you. It was several years ago though. Some black and white MOP that size. I wasn't real impressed with the look for stoppers. Don't remember any Paua that size.

For platters, think of mounting it proud of the surface just barely and sand it down, do this with lathe keeping sanding paper at the bottom of the swing where wood is just starting to move away from you and use dust collection at that point to move it away from you. Keep collector hose close enough to see dust going straight into the hose.

I've gotten some of this material from:\

Rio Grande

Stewart McDonald (think it is www.stew-mac.com) google them if wrong

Even Grizzly has MOP.

If you are interested in working shell from raw material there is really good book on the subject, don't have info in front of me it's in shop but it is "Inlaying Pearl". Will get you info if you tell me you want it.

Don

Re: Using Paua and Abalone

#4

Steven Antonucci

I use mineral oil to form a slurry

steve antonucci

>no dust, no issues. I think the oil also makes the color a lot more vivid...

Steve