Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

home built lathe duplicator

Posts

home built lathe duplicator

#1

home built lathe duplicator

john lucas

>I've never been a fan of these things, mostly because of the scraping action. I can't believe you could get fine details, especially sharp points. However I have a project that seemed perfect for this so I decided to see if I could build one and if it works I could play with it and see what kind of job it does.

I searched all over the net and found 2 examples that I thought could be built easily out of wood. I modified both of course. It will be a few more days before I have it done because I have to work a long day followed by a club meeting tomorrow night.

I'll post photos and results when I get it up and working.

I have a diamond shaped metal cutting bit that I'm going to use. I don't know if this is a good choice but it's what I've got.

Re: home built lathe duplicator

#2

Re: home built lathe duplicator *LINK*

Dick Coers

>Always like to see shop made tools, looking forward to the pics. I'm adding a link to the Vega cutter I use in my mini duplicator.


carbide v cutter

Re: home built lathe duplicator

#3

Thanks Dick

john lucas

>The cutter I'm using is similar. I'm not sure it's exactly the same. Mine has a slight gullet right behind the cutting edge. This is common in carbide metal cutting bits. I can't tell from looking at the photo if that bit has that detail or not.