Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

sealing resineous pine

Posts

sealing resineous pine

#1

sealing resineous pine

John Veerkamp, Western Mo

>I recently turned a nice pine bowl that is very resineous. I oiled it with Mahoney's utiliarian oil to make it transparent and pop the figure. What should I seal it with to stop the resin from bleeding out. Did I say very resineous?

Thanks,

JohnV

Re: sealing resineous pine

#2

Re: sealing resineous pine

john lucas

>I use shellac on flat wood to stop the resin from coming out of knots. I suppose it would work on you piece.

Re: sealing resineous pine

#3

Ellis Walentine

Something I've wanted to try

Ellis Walentine

>I suspect there is a temperature at which the resin becomes cooked and stops bleeding out. I would like to try a simple controlled experiment to see if that's the case. Anybody know? And, of course, it would be interesting to see what happens to your turned bowl at that temperature...

Ellis

Re: sealing resineous pine

#4

Re: Something I've wanted to try *LINK*

Barbara Gill, Remlik VA

>Ellis, you are correct. The commercial kilns set the sap at a certain temperature. The information will probably be on the WoodWeb Sawing and Drying Forum.


Link

Re: sealing resineous pine

#5

More Info.  *LINK*

Barbara Gill, Remlik VA

>


Another Link

Re: sealing resineous pine

#6

I wonder?????

Barry Irby

>I did not read the info on Barbara's links, but I am sceptical. As a Home Inspector I go in attics nearly every day. I have seen scores of rafters with sap bleeding out on them, sometimes in copious amounts. Usually, by the time I see it, it is dried or cooked and looks like bright amber. Surely most of that lumber had been kiln dried before it was installed.

Re: sealing resineous pine

#7

Ellis Walentine

The article said...

Ellis Walentine

>...there are a lot of chemicals in sap, and they set at different temperatures. Most attics probably don't get up to 160°. I actually thought the critical setting temperature was higher than that.

Thanks for the link, Barb.

Ellis

Re: sealing resineous pine

#8

Re: The article said...

Barbara Gill, Remlik VA

>You are welcome. Barry, just normal kiln drying won't do it. I imagine everyone takes shortcuts.

Re: sealing resineous pine

#9

Re: The article said...

Scott in Socal

>Barry,

Most homes framed with the pine varieties are framed while the wood s fairly green, and definitely not kiln dried. It really ranges depending on how long the wood has been sitting around, but I've worked with wood so wet it would freeze together in the stacks and was ridiculously heavy. Trying to handle 14' 2x12s by yourself was miserable, as they weighed well over 100lbs.

I've also bought framing lumber in less common dimensions that was dry as a bone and 90% of it was un-useable because it wasn't properly stickered as it dried.

Re: sealing resineous pine

#10

Re: sealing resineous pine

John Veerkamp, Western Mo

>Thanks everyone,

I'll try the shellac. my only source of heat is loml's oven. I don't think she'll appreciate turning it into a kiln.

John