Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Gkued the wrong finial on holowform

Posts

Gkued the wrong finial on holowform

#1

Gkued the wrong finial on holowform

ken chase

>I'm getting dumber by the minute. I superglued a finial into a recess I cut into a hollowform. I previously finished both the finial and the piece. Is there a way to disolve the glue enough

to pry the finial loose?

Thanks

Re: Gkued the wrong finial on holowform

#2

Dry dripping acetone on the joint

john lucas

>

Re: Gkued the wrong finial on holowform

#3

Re: Dry dripping acetone on the joint

Scott in Socal

>They make CA debonder, usually containing acetone and nitromethane. You can try soaking the area in that, it will take a little while to soak in and dissolve the glue, but should work eventually.

Re: Gkued the wrong finial on holowform

#4

Re: Dry dripping acetone on the joint

ken chase

>Thanks. Guess I did a poor job gluing and luckily I was able to remove the finial and match it to the correct mate.