Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Pink Flame

Posts

Pink Flame

#1

Pink Flame

keith zimmerman, Normal, IL

>Here is my latest hollow vessel. It Pink Flame with a Blackwood collar. It is the first piece to come off my new Delta Midi VS. This piece is about 6" in diameter and 3" high. The finish is 3 coats of Waterlox followed by buffing with all three Beall wheels.

Thanks for looking.

keithz


img

Re: Pink Flame

#2

Mike Stafford

Re: Pink Flame

Mike Stafford

>Keith, it is always nice to see a pretty woodturning. You did a good job with this piece of wood. I love seeing a beautiful piece of wood turned nicely.

This is a species with which I am unfamiliar. Where did you get it? and how does it turn?

Re: Pink Flame

#3

Re: Pink Flame

keith zimmerman, Normal, IL

>Thanks Mike. Pink Flame is from the Amazon jungle in Peru. It came from Jim King's mill down there. I purchased this piece at Woodcraft a couple of years ago. I found this to be quite dense and very hard. I had a dickens of a time getting it to 5/16" wall thickness with my Keltons. Probably because the wood was very dry. It is also heavier than it looks.

If I had it to do again, I think I would make an effort to turn it sooner after obtaining it.

keithz

Re: Pink Flame

#4

Re: Pink Flame

Ralph

>I'm impressed Keith got that done. We've (locally) had almost zero success with Pink Flame.

Jim King did some research a while back and I think he identified the specie for Pink Flame, but it is a really spectacular wood.

Re: Pink Flame

#5

Re: Pink Flame

Eduardo sarmiento-hall

>Hi I have turn quite a few of those mostly boxes that wood have to be turn wet and thick, then every week do a little more each time until is the way you want my2cents