Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Turning Ziricote Advice needed

Posts

Turning Ziricote Advice needed

#1

Turning Ziricote Advice needed

Thomas Skaggs, Foothills of Mount Level

>Been a while since I have turned so I have a large bowl started. I was given a large block of "Blackwood" a while back. Sealed in wax, that's what I thought it was. But having cut it I see that it is Ziricote. That's cool but I have never turned it. I started on it this morning and so far I don't get shavings, I get sawdust! Nature of the beast I assume? I'm sensing toxic...is that correct? I am wearing a respirator. How about finish? Any advice?

Thanks

Tom

Re: Turning Ziricote Advice needed

#2

Re: Turning Ziricote Advice needed

Bruce McElhaney, Spring Lake, Michigan

>I've turned a bit of Zircote and find it's not that difficult to work with. It is a dense wood similar to Cocobolo, Bocote and Rosewoods. It turns well with sharp tools and can hold good detail. It finishes similarly to those other dense woods and can achieve a a nice smooth polished finish. If you are getting sawdust when turning something is not quite right.

Re: Turning Ziricote Advice needed

#3

Re: Turning Ziricote Advice needed

Nick Tuzzolino

>I have turned only a few small pieces of ziricote. As we know, exotics affect us all differently. If I even touched the stuff again, I would use all the respritory protection I could get. A real sneeze maker, for starters.

Re: Turning Ziricote Advice needed

#4

Re: Turning Ziricote Advice needed

E.T.

>Yes, ziricote is a dusty wood to turn. Even with propper cutting action with a gouge and skew. Quite dirty, in fact. When I have to turn some, I leave it to the last then give the work area and muself a good clean up. The powder seems to stick to your hands and other exposed skin and makes one feel dirty until you wash up really well.

I finish the things that I make with U-Beaut products (Shellawax. Works well, Polishes up beautifully.

While this is not the worst wood I have turned, it does make it into the top 5 along with red palm and greenheart.

ET

Re: Turning Ziricote Advice needed

#5

Thanks

Thomas Skaggs, Foothills of Mount Level

>Thanks,

You confirmed what I was wondering. Yes, tools are sharp but regardless this Ziricote is dusty! Seems to tool ok though. Thanks for the advice.

Tom