hand mirrors
Doug Turner
>some rose engine decorated mirrors in walnut, Brazilian cherry,maple, beech.
Knowledge You Can Build On — Est. 1998
hand mirrors
Doug Turner
>some rose engine decorated mirrors in walnut, Brazilian cherry,maple, beech.
Re: hand mirrors
john lucas
>Very nice Doug. One of these days when I win the lottery and can retire I'll have a Rose engine machine. :)
Re: hand mirrors
Doug Turner
>John, I made the MDF model that Jon McGill has plans for in the American Woodturner magazine. I use a Dremel 400 for a cutting frame, and it was surprisingly easy to build. I did have to buy the rosettes after I spent 3 days trying to make one rosette.
Re: hand mirrors
john lucas
>I have an older no name flex shaft machine that I can't find a replacement drive shaft for. I have been thinking about putting a pulley on it and using it to drive the cutters.
Re: hand mirrors
Doug Turner
>That should work. It is nice to have variable speed but a step pulley would work also.
Re: hand mirrors
john lucas
>Doug I was just talking about using the machine to power the cutter. I would build the machine you built or at least start there and add my own modifications.