Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Anyone Want To Go "Wild Hare" - for free?

Posts

Anyone Want To Go "Wild Hare" - for free?

#1

Anyone Want To Go "Wild Hare" - for free?

charlie belden

>I've been playing with ways to add actual movement to turnings or turnings as moving components of a piece and have been on the lookout for motorized stuff lately.

SO - while browsing at the nearest Hobby Shop - I stumbled on a cache of K'NEX motor and gear box "things" - for - wait for it - $4 each.

This includes the little electric motor, gear box with two power take offs, power cord, battery box - with switch - that lets you reverse the motor's rotation.

Atached is a pic of this puppy on 1/4" graph paper - at close to actual size.

I'm looking for someone who thinks she/he has a Wild Hare Idea that will use this thing - and will post a pic of what he/she comes up with. This offer is FREE - I'll even pay the postage - within the Continetal USA. You can apply here or e-mail me directly. I'll give it a few days then send The Thing out.

They've got probably 15 or 20 more sitting on a shelf at the hobby shop and I'm considering making them an offer for the whole lot. They're going for $17.57 on the Knex.com website. Looks like it's part of a Leggo like "system". The Knex site is really slow so I don't have much info on this thing and what other things can attach to it.

I KNOW I'm not the only Wild Hare Ideas person in this forum . . .


img

Re: Anyone Want To Go "Wild Hare" - for free?

#2

Re: Anyone Want To Go "Wild Hare" - for free?

David Belser

>All right Charlie - count me in!

My mom saw the pictures of "stick ball" and her first question was "What does it do?" - ROFL

- Dave

Re: Anyone Want To Go "Wild Hare" - for free?

#3

Re: Anyone Want To Go "Wild Hare" - for free? *LINK*

charlie belden

>Went back to the hobby shop and bought up their inventory of these K'NEX things - at a buck each discount - $3 each - if I bought - TWENTY SEVEN of them, bringing my total to 30.

Got to stop browsing at hobby shops.

Gave one to a glass blower and glass bead artist and another who does Found Art pieces. Will be interesting to see what people do with these things.

I've got the first Wild Hare Ideas for this thing.


First Wild Hare Idea

Re: Anyone Want To Go "Wild Hare" - for free?

#4

Re: Anyone Want To Go "Wild Hare" - for free?

Peter Rand

>Charlie - I make kinetic wood turnings. I'm very interested in these motors. Is there a list of specifications? Or another source?

Peter

Re: Anyone Want To Go "Wild Hare" - for free?

#5

Re: Anyone Want To Go "Wild Hare" - for free?

charlie belden

>Peter:

I've been trying to e-mail you via your research site and another I found. Before I answer your questions I want to publicly acknowldge you as one of the two sources of inspiration for incorporating actual movement into turned pieces (the other being Sigfried Shcroeder (sp?)). I'd seen your wired together Sliced and Diced pieces but didn't realize that the wires holding the parts were spring wire that allowed the parts to move - and I assume - ripple. When I saw the Femisphere that rocked and rolled by itself - and found that a small electric motor was responsible I made the wires for movement connection.

The box these things come in has nothing on it except K'NEX and the number 92875 which seems to be the K'NEX part number. K'NEX is also on the cover of the battery pack. This thing is a component of K'NEX's line of toys which are a cross between Leggos and Tinker Toys. The K'NEX site (www.knex.com) has them - Tethered Power Pack Motor. Couldn't find any specs on the thing on their site. Toys R Us carries K'NEX stuff though I haven't checked the local store to confirm.

It runs on two 1.5 V AA batteries - in series I believe so it uses 3V (?). It's geared pretty low - maybe 15 rpm and has enough torque that when you put a finger tip and thumb tip on the ends of the main drive hub even pinching pretty won't stop the rotation.

Rather than guess at the specs for this thing - send me your address and I mail you one to play with. If you can find a use - great, if not, a turn an adapter so hook it up to Tinker Toys and give it to a kid. He or she will find a use for it I'm pretty sure.

Re: Anyone Want To Go "Wild Hare" - for free?

#7

Re: Anyone Want To Go "Wild Hare" - for free?

Peter Rand------WebKitFormBoundaryzz+WQbo2mI36L536

>Hi Charlie;

Thanks for the info. I�ve just recently come to see your kinetic work and your great spirit in this minority sport!

I would love to try this motor. Many thanks for the offer. My address is

Peter Rand

1278 Line 2 RR#6

Niagara-on-the-Lake,

Ontario, Canada

L0S1J0

e-mail me at rrand@brocku.ca for easier communication

I published a motor system in Woodturning design some time ago that you can read about, but it is good only for low torgue requirements. And I can tell you about programmable microcontrollers for strong servomotors for more complex motions if you like.

Kinetic art really is a minority sport and in trying to find out why I am writing a history and finding its regular boom and busts over the decades. Technology has been the major barrier but that is no longer an excuse.

A local ceramic and iron artist and I are planning a kinetic show next year where everything � with our sense of aesthetic - should move.

You do not seem to be a member of WOW and probably should be. Would you like an invitation?

So glad to �meet� you!

Peter.

PS this is a second send - the first got lost???