Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

A Great Day at the Lathe

Posts

A Great Day at the Lathe

#1

Bob Moffett

A Great Day at the Lathe

Bob Moffett

>Mike Stafford did a box making demo for our club, The Piedmont Triad Woodturner�s Association, Tuesday night and taught an all day workshop on Wednesday. Four of us from Wood Central were there, Bob Moffett, Lan Brady and Jim Terry and Lisa Mason. We all went home with completed boxes. I showed mine to my wife and she didn�t believe I had done it. She thought it was one that Mike had made. We all had a great day, a lot of fun and learned a lot. Mike is a lot of fun to be around, an outstanding turner and a great guy. Sure beat being at work!

Re: A Great Day at the Lathe

#2

Re: A Great Day at the Lathe

GalenV in Iowa

>Bob

If the wife has given approval to your box how about a picture?

Being newer to turning I enjoy looking at others work and also try to understand how they were turned.

I have save pictures that were posted by Mike Stafford but the only thing I miss is a picture of how the box and lid were formed and finished inside.

Saved some of Dick Hines box pictures and there too I wonder how they are finished inside.

Hint! Hint!

Whenever I see a turned lidded vessel of any kind and a sign "please do not handle" it'a like well why did you bother to hollow if I cannot peak inside! May as well been a solid form and a LOT less work.

Not sure at what point in turning you don't care about how the inside was done or even the way the lid fits to the piece.

Galen

Re: A Great Day at the Lathe

#3

Win, win, win, win, ...

Ed Moore in SW VA

>It sounds like you had a great time with an excellent teacher. That's one win.

I know how much Mike loves to teach boxmaking - another win.

Your wife is proud of you - win #3.

You have a nice trophy - win #4.

Ed

Re: A Great Day at the Lathe

#4

Re: A Great Day at the Lathe *LINK*

Philip Morris

>Galen,

I assume that you have seen Mike's excellent WC article on turning a lidded box. Among other things, it covers turning and finishing the lid.


Turning an End Grain Lidded Box

Re: A Great Day at the Lathe

#5

Re: A Great Day at the Lathe

GalenV in Iowa

>Phillip:

Yes, thank you, I have even printed this out before to have in my folder for reference. Mike had reponded to me before and I found that he used dovetail jaws to hold the box rim while finishing off the bottom. I could see how that would hold better than mine and be less prone to leaving marks.

Mike has posted different shaped boxes some with more of an overhung lid but just not sure if they end up with similar lip arrangement or altered.

I should ask at the posting if the lid removed could be shown but I know most want to insure they have posted a professional picture and another would involve more time. Turnings are so good that get posted I am not even looking at shadows or a glare etc.

Galen

Re: A Great Day at the Lathe

#6

Mike Stafford

Re: A Great Day at the Lathe

Mike Stafford

>Galen, thank you for the kind words.

I have on occasion posted pictures of my boxes both open and closed but I have gotten out of the habit. I will try to remember to post some pictures like that again.

I try to have the inside of my boxes finished as well as the outside. That is the perfectionist coming out in me.

I learned while working in a gallery that sells my boxes that women were my primary customers. Watching a woman examine a box is almost a sensual experience. When they remove the lid their fingers will flow into the interior of the box and touch every surface. If they find a rough spot you will see a raised eyebrow or the eyes will lift. You will know then they found some area that was not sanded as it should have been.

Boxes are small objects that people will hold and caress in their hands so the finish, smoothness and continuity of the form are important.

Re: A Great Day at the Lathe

#7

Mike Stafford

Re: A Great Day at the Lathe

Mike Stafford

>The entire trip was fabulous for me.

On Tuesday night I did a demo for Bob's club which was almost anti-climactic after seeing the work in the club's instant gallery. The President's club challenge was boxes so there were many terrific boxes on display. There was a lot of terrific work on the show and tell tables.

I really enjoyed spending time with all my old friends at PTWA; John Morris, Jim Terry, Jim Barbour, Lan Brady, Bob Muir, Earl Kennedy, Linda Michael, Jim and Rita Duxbury and many more. I know I have left some out. I had an opportunity to make a lot of new friends also. Lisa Mason is a retired police officer so I had to mind my P's and Q's.

The hands on class was so much fun. We spent a day laughing, swapping stories and techniques, making woodchips and sharing the camaraderie that makes woodturning the activity we all love. It was a fabulous trip with a wonderful group of guys and gals.

I just have to thank Bob and Jim Duxbury as well as the rest of the PTWA for giving me the opportunity to spend time with their club. Life is really good when you can have days like these. Thank you guys. And Bob, thank you and Charlie for your hospitality.