>In about 10 days I will be one of 6 students taking a hands-on class with French woodturner and sculptor Alain Mailland. I'm really looking forward to learning some 'off the beaten path' turning techniques!!
I would like to ask if anyone is aware of sources of information (published articles, web sites, newsletters, etc.) that might have information about the special tools Alain uses to make his "flower" and other pieces, or additional specialty tools he has developed. Google (and several other) web searches has not netted much information (although some interesting videos and images), and I'd like to know as much as I can about his tools and turning techniques before attending the class. I own the book New Masters of Woodturning, and have read the chapter in this book devoted to Mailland. Are there other reviews or summaries of his tools and techniques available?
I feel "woefully un-prepared for class*" right now, a very bad feeling, particularly for a professor! In contrast to some of my students, I can say, that at least I tried to look for what I'd like to study!
Any help with references to information on Alain's tools will be much appreciated!!
Many thanks,
Rob Wallace
*Quoted from a concerned and desperate Economic Botany student, Biology 355, Iowa State University, Spring 2009 semester.
>.... because I'm taking a class next week with Jean-Francois Escoulen at Arrowmont. From my research I see that he is a big time user of the bedan, a tool I haven't used in many years, and the one I have is rather small(5/16" Sorby)compared to the ones I see him using in several videos. I don't want to buy another until I have good reason, and I doubt I'm going to radically change my work methods after all these years. So I'll take what I have and see if I need a new toy/tool after the class.
>Rob - I might have a picture of some of his tools in my 2005 archive from our collaboration conference in Australia. I'll try to find something for you this evening.
His tools are hand-forged and are curved blade-like cutters. Kind of a hybrid with a scraper and a bowl corer. They have different degrees of curvature, which are used for making the thin slices of his "petals."
Believe it or not, I've used a 1/4" and 3/8" plane old bench chisel like a bedan. Single bevel, but a 30-35 degree bevel angle rather than the 40-50 degrees I think are on bedans. Of course this is for small spingle work and stuff under about 2 1/2" in diameter (lidded boxes) so the overhang of the tool rest is kept to a minimum by moving the tool rest - a lot.
I've thought of using a big beefy mortising chisels
Teacher-student reversal of rolls! The Ames Turners Club should be looking foreward to a paper on your studies. We might let you by with a rough draft and then just be ready for a question-answer session. :>)
Nah! Probably just let you off with a good show and tell.
I'm not aware of other sites about the tools apart from what has been already mentionned. Alain forges his tools from carbon steel, they have curved shapes that are made especially for the intended piece. the general shape is somewhat like the kelton scrapers (straight, slightly curved, curved), except they have a more pointy end and cut/scrape with both sides on almost the whole length of the tool. very easy to use, don't worry. the bad news is when you'll be home, you will be looking for a coal forge to start forging you own tools too. Alain is a great guy, have fun.
>I wanted to thank everyone for their responses and suggestions about getting more information on Alain Mailland tools. I discovered a few new information sources that I had not discovered before, as well as the excellent resource that the Carolina Mountain Woodturners Web site is! (I'll definitely post a link to this site on my Woodturning Links web page, and have bookmarked it on my laptop for "Emergency Use" during excruciatingly boring faculty meetings as a site to surf while nothing productive is going on at the meeting!)
I am really looking forward to my class with Alain next Sunday. We've been told that Binh Pho has purchased the "fresh" burl material from a west-coast supplier for Alain's classes, and that we'll each have the special tools made by Alain for use throughout the class. We'll be working on his 'flower' form, and perhaps other techniques of turning and sculpting. (He just finished doing a class in Chicago, and will be in the Quad Cities (Rock Island, IL) next weekend before traveling to Albuquerque.)