Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Oil Lamp

Posts

Oil Lamp

#1

Oil Lamp

WayneLeach - NW Ont

>Hi Everyone,

Finally got back to turning and built a new "phrugal" photo booth so I could show some of my creations and hope to participate more frequently.

My wife (dog obedience judge and show exec.) wanted something for a Chinese auction at their annual dog show so this is what I made for her to donate. These lamps are very popular in the resort area where we live.

Thanks for looking and any comments/critique are welcome.

P.S. The burned lines are very crisp/sharp in real life but look a little jagged in photoshop!

Regards,

Wayne


img

Re: Oil Lamp

#2

Re: Oil Lamp-bottom 

WayneLeach - NW Ont

>


img

Re: Oil Lamp

#3

Steve Kubien

Re: Oil Lamp

Steve Kubien

>I've never seen this done before. Is the oil lamp part of a kit or did you rescue the parts from an existing lamp? Great job.

Steve

Re: Oil Lamp

#4

Re: Oil Lamp

WayneLeach - NW Ont

>Steve,

Craft Supples USA sells the oil reservoir($8.99) and glass chimneys($5.99). Their price on the glass chimneys is pretty steep so I get them at Wallmart in the candle section or at Michaels for around $2.00US

I mail order them when I am wintering down south.

Wayne

http://www.woodturnerscatalog.com/store/Projects___Lamp_Candle_Accessories___Oil_Lamp___oil_lamp?Args=

Re: Oil Lamp

#5

Re: Oil Lamp-bottom

Frank Joseph

>Nice job, like your logo.

Re: Oil Lamp

#7

Re: Oil Lamp------WebKitFormBoundaryeYlrWJ0A55NdYi

Emmett Manley, Lakeland, TN------WebKitFormBoundar

>What is the wood? Looks like some hickory I have used.

------WebKitFormBoundaryeYlrWJ0A55NdYi+R

Re: Oil Lamp

#8

Re: Oil Lamp------WebKitFormBoundaryeYlrWJ0A55NdYi

Emmett Manley, Lakeland, TN------WebKitFormBoundar

>Opps, I just looked at the photo of the bottom. I have a habit of not opening messages with NM indicated.

Re: Oil Lamp

#9

Re: Nice job Wayne, and I'm curious......

Jamie Donaldson

>...about what you use for your name on the bottom? It's very neatly done- some sort of plate or sticker? As to the photo, back away from the booth and use the zoom at longer focal lengths to fill the frame. The wide angle creates barrel distortion, and moving the turning further away from the backdrop will diminish the shadows and wrinkles in the background! (;-D)

Re: Oil Lamp

#10

Re: Oil Lamp

Thad

>Wayne,

do you use the forstner bit they recommend, or just measure & hollow straight?

I am also curious about your "signature plate" on the bottom. Is that an insert?

Nicely done. Makes me want to try one.

~ Thad

Re: Oil Lamp

#11

Re: Nice job Wayne, and I'm curious......

WayneLeach - NW Ont

>Jamie,

Thanks for the pointers on the distortion-I'll try that on the little bowl I am working on as it has burned dec in it. I only had a 300 watt halogen too so I will have to get 500 watt and also experiment more with the white balance as I end up doing too much work in Photoshop.

I appreciate all the help that you provide in other posts very much.

As to the signature, I was never satisfied with my hand signing so decided to use some of my millions of nature and animal photos to give a little surprise on the bottom.

I use a program called Smartcode Studio (the free community version) and select a round label from the templates available. I change the size in page properties to suit the recess in the bottom (I make the label slightly oversize and undercut the recess so it tucks in and no visible edge). When done, I print the labels on my HP color printer onto 4x6 gloss photo paper. I cut the label out using scissors or a matt cutter. The font I use I got off the web-its called Woodbadge I think and looks like branchs! I use super glue to fasten the label in place and then use "build 50" or other decoupage (casting resin) and pour over to seal in place. Sounds complicated but is very fast to do once you have the templates set! People seem to like the little bonus image they get?

Hope I didn't miss anything.

Best regards,

Wayne

Re: Oil Lamp

#12

Re: Oil Lamp

WayneLeach - NW Ont

>Thad,

I should have bought the bit but so far have done by hand the same way as hollowing bowl or box. With the number of people who want them I will get the bit this fall.

Take a look at the reply above to Jamie re: the signature image.

Thanks for the interest.

Wayne