Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Bradford Pear?

Posts

Bradford Pear?

#1

Bradford Pear?

John T

>My M.I.L. called saying she had a Bradford pear tree come down in her yard during a large thunderstorm this evening.

I've seen the tree, and its not huge - I'd say about average height and diameter for a pear - maybe 25 feet high, foot and a half to 2 feet in diameter, maybe????

Is Bradford pear any good for turning (assuming I can find some big enough pieces)?? I'm a relative newbie to turning, and I'm always looking for wood to practice on....

Thanks.

-john-

Re: Bradford Pear?

#2

Re: Bradford Pear?

Brian McInturff

>Oh Yeah. I like turning Bradford Pear. Even the root. Keep as much as you can and coat the ends with some anchorseal.

Re: Bradford Pear?

#3

Re: Bradford Pear?

Dennis Yoder

>Turns like a dream, smells wonderful, moves a bit and cracks if not dried carefully. Grab some. Dennis Y

Re: Bradford Pear?

#4

Re: Bradford Pear?

Barry Irby

>Since all these trees have a very short log, Bradford Pear is like mouse milk, you know there is some, but its hard to imagine how little there might be.

I aggree with those who came before me, Its great stuff to turn. Cuts clean and smooth. Grab it. Cut the blanks into half logs to release the drying stresses. Makes great bowls.

Re: Bradford Pear?

#5

agreed...get what you can

Thad

>

Re: Bradford Pear?

#6

Steven Antonucci

I started turning the piece you sent me tonight

steve antonucci

>And I agree that it's a good wood to horde...

S

Re: Bradford Pear?

#7

Steve Kubien

Re: Bradford Pear?

Steve Kubien

>Terrible stuff. Avoid at all costs.

Steve

P.S. What was your M.I.L.'s address?

Re: Bradford Pear?

#8

Worst stuf I've ever laid my hands on....

David Belser

>I'd be happy to take it off of your hands for fire wood. :)

Get as much as you can reasonably turn. It tends to be a little small but I quarter the smaller branches for spindle stock. It is a pleasure to turn. I little plain like cherry. Great for carving etc. after being turned.

Enjoy.

- Dave

Re: Bradford Pear?

#9

Re: Bradford Pear?

Frank Joseph

>I have only had a few small blanks, but what I had was nice to turn It was green but not very wet.

Re: Bradford Pear?

#10

great....

Thad

>...looking forward to see what comes of it

~ Thad

Re: Bradford Pear?

#11

Thanks All !!!

John T

>Gassing up the chainsaw and heading over to clear the tree right now.

If/when I ever get aroudn to making something, I'll be sure to post.

-John-

Re: Bradford Pear?

#12

Re: Thanks All !!!------WebKitFormBoundaryOx6Pixb+

Emmett Manley, Lakeland, TN------WebKitFormBoundar

>Bradford pear is very turner friendly. Very little warping or cracking in my experience. Rather plain but perfect for making ornament globes.

------WebKitFormBoundaryOx6Pixb+n0S5R2c3

Re: Bradford Pear?

#13

Re: Bradford Pear?

Michael Wine

>Even if it ain't purdy, it's still practice!

I snagged a few left overs from cutoffs at a Woodcraft once. While not "remarkable", it wasn't ugly!

Re: Bradford Pear?

#14

Back from tree clearing

John T

>Well, the tree wasn't as big as I misremembered -

Best part of the trunk was a little over a foot, bit its straing and clear. Does look kind of plain, but hey - its free, and I can use the practice.

Didn't take much of the branches, except for som thicker pieces I might use in the meat smoker.....

Thanks for the replies -

Hope I can get some turning time soon, so I can see what's inside this tree....

-John-

Re: Bradford Pear?

#15

Keith Tompkins

Re: Back from tree clearing

Keith Tompkins

>Kinda plain....perfect for painting! Actually, it will mellow to a pinkish tone, quite beautiful.

Re: Bradford Pear?

#16

Re: Bradford Pear?

Chip in Plano

>If anybody wants some fresh, we just had 80mph store pound through norther Dallas tonight. Bradford pears are inherently weak trees so I'm sure there's some laying around for folks to pickup.