Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Phil Wall

Posts

Phil Wall

#1

Phil Wall

Barbara Gill, Remlik VA

>I think Phil deserves an article in the AAW journal but I didn't know him well enough. In fact I hardly knew him at all. How about some of you Bucks Woodturners? Is there some one or more than one who could get an article together about Phil?

Re: Phil Wall

#2

Dominic in Bucks County PA

Re: Phil Wall

Dominic in Bucks County PA

>Barbara,

You wrote:

"I think Phil deserves an article in the AAW journal but I didn't know him well enough. In fact I hardly knew him at all. How about some of you Bucks Woodturners? Is there some one or more than one who could get an article together about Phil?"

I think Phil deserves an article as well. While I really don't have the time to author the entire piece, I'd be happy to contribute an anecdote or two.

I knew Phil quite well. I consider him and Bill Grumbine as my "wood turning" mentors. Back when I first started wood turning, Phil was kind enough to open his house and shop to me (a total stranger). He actually helped me turn my first bowl. It was a small box elder bowl that I still have to this day. Even though he lived less than 6 miles away, I met him through Wood Central's turning forum. He invited me to attend those informal but highly informative meetings he hold once a month at his shop. "First Tuesday at Phil's" I believe it was called.

I learned the fine points of shape and form from him and tried out his soap soaking technique (which was featured in the AAW article he co-authored with Ron Kent). He was a generous person who loved to share his enthusiasm and knowledge of wood turning.

Just about any of the Buck's Woodturners would have a good Phil Wall story. Dinyar Chavda and John Williams, who were part of the group that met at Phil's, would have their share as well.

See ya around,

Dominic

Re: Phil Wall

#3

Barb Siddiqui

Re: Phil Wall

Barb Siddiqui

>What a great idea, Barbara. I hope someone takes you up on it. You might contact the editor with the suggestion, and she could find a writer.

Re: Phil Wall

#4

Ellis Walentine

I didn't know him that well, but...

Ellis Walentine

>...he and Gary Evans dropped by to visit one day, and we had a most enjoyable afternoon. He brought some of his wild carved sculptures along with him, but he really wanted to get out to my shop and play with spinning wood. He brought a nice piece of ambrosia sycamore with him and asked me to collaborate with him on a piece, so I turned the outside shape and he hollowed the inside. I still have the piece on my mantle. It reminds me of him all the time.

I'm very sorry that I couldn't have gotten down to see him when Terry Daniel and others had that great party at his place in NC before he passed on. You don't get a second chance for visits like that.

Ellis



Re: Phil Wall

#5

Re: Hey Dominic- the story is .....

Jamie Donaldson

>...half written just from your comments here!

Re: Phil Wall

#6

Re: I didn't know him that well, but...

Gary Evans Tallassee, TN

>The impetus for that visit was an ad that I had placed here on the Classifieds for a couple of pieces of elm burl that I had. Phil had a commission for a pair of bowls and he wanted to try the wood that I was selling. As it turned out, there was a billiard expo at Valley Forge that weekend, so I drove up for the expo and spent a day with Phil. He was a remarkable guy.

He not only brought me by to meet you, Ellis, but he also took me over to meet his good buddy, Dick Tuttle. I had a heck of a time convincing Dick that the wood was ambrosia sycamore, but he was certainly willing to trade for a piece of it. I came home from that trip with a turning from Phil and Dick both.

I was fortunate to go visit Phil a couple of times after they moved to NC and had a great time with everyone at the open house that he held there. I had some pics of that event, but danged if I can find them now.

Phil always claimed that you should listen to the music of the wood that you were working with. He couldn't hear the human voice very well by the time I met him, but I know that he could hear the wood.

Gary

Re: Phil Wall

#7

Re: Phil Wall

Dave Peebles Lyons, Ohio!

>Hi Barbara,

When I first found the little piece of cyberspace many many years ago, I think Phil was already posting here. It was a much quieter place in those days. Maybe 10 or 20 posts a day. It sure was easier to keep up then. :)

But I would bet that a search on this site would turn up a wealth of info that Phil shared with us all. Probably more that enough for a well deserved article on Phil.

I think I will throw in my Woodcentral CD and see just what the old days were like. I'll almost bet that I will still learn some good things from the task.

RIP Phil and Dick...

Dave