Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Sunday Specials

Posts

Sunday Specials

#1

Sunday Specials

Jim Shaver - Oakville, Ont, Canada

>Hi,

It's great to see wilbur post his first pen and not to steal any of his thunder, I would like to add some of mine , that I turned today

Olive wood Barons, CA finish (I like to matt the CA finish)

Photobucket

A few Baron Box Elder Burls.

Photobucket

All the blanks and kits came from www.penblanks.ca

Thanks,

Jim

Okay Wilbur, what's next on your pen schedule?

:-)

Re: Sunday Specials

#2

Steven Antonucci

Like the olives!

steve antonucci

>One of my favorite woods to turn. The top two on the right are my favorites.

S

Re: Sunday Specials

#3

Re: Sunday Specials

GolfSteve in Calgary

>Hi Jim,

Nice looking pens.

How do you matt the CA finish?

Thanks,

Steven

ps. great photography

Re: Sunday Specials

#4

Re: Sunday Specials

Jim Shaver - Oakville, Ont

>Thanks Steve,

I polish the CA to 12,000 MM then I go back and use the 6000 wet very lightly, takes the gloss off the 12,000. I go to 12,000 to see how clean my finish is with back lighting I find some times I abrade the CA off, so I want to see it is complete before I knock it back a bit, maybe that is excess, I don't know, works for me.

The finish on the Box Elders is polish only, no sanding at all, all from a clean final skew cut, love stabilized woods...

How much snow did you get this weekend?

take care,

Jim

Re: Sunday Specials

#5

Re: Like the olives!

Jim Shaver - Oakville, Ont

>Thanks Buddy!!

The middle is my favotite....the smell when turning it is wonderful.

Take care,

jim

Re: Sunday Specials

#6

Re: Sunday Specials

GolfSteve in Calgary

>We just got a hint of snow. Nothing really stuck on the ground, but the garage roof was fully covered with about 1 cm of snow first thing in the morning.

Thanks for the matt advice. I thought you might just stop at a lower sanding grit - but then thought this might leave scratches that to an experienced eye might give the impression that you just didn't do a good job on the sanding.