Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

So there I was.....

Posts

So there I was.....

#1

Keith Tompkins

So there I was.....

Keith Tompkins

>Minding my own business, crossing the Whitestone Bridge, with the radio blasting, munching on a Moon Pie. It was typical Friday night rush hour traffic, and I was early for a scheduled dinner with the Long Island Woodturners. Then, it happened.....I hit a bump in the pavement, and all h@ll broke loose. My Ford pickup began to shake violently; I hit the brakes and it got WORSE! Uncontrollable. Then it seemed to get better...I know something about what makes a vehicle tick, but this had me baffled. WHAT was that? Coming off the bridge, I'm in the far right lane, and it happens again...only worse! I could see a u-turn area just off the bridge, so I decided to cross two lanes of traffic and head for the median; there was nowhere else to go. I cut across when I spotted an opening, and hit the brakes at the last minute. Whew.. I made it! When I got out, I checked over the vehicle...the right-side tie-rod had broken. (That explained the violent reaction when I hit the brakes...the wheel tried to instantly turn backwards!) Man, I cudda' been killed, or worse! Other that that, my trip was fairly uneventful. I ended up having a great time with a super turning group, and the truck was fixed by a garage in the Bronx..I think it was the Bronx..in time for me to leave for home.

Re: So there I was.....

#2

Re: Me too in my '55 Chevy Bel Aire.

Al Crandall

>I hope to never take that wild ride again. Once is enough, and I am glad that the outcome for you wasn't worse.

Re: So there I was.....

#3

Brad Vietje

Never broke a tie rod under way but...

Brad Vietje

>About 20 years ago I had a sudden vibration, then noise, then awful lurching on the right front wheel in heavy traffic on a busy road. I was able to pull over in a few hundred feet, and the tire was almost laying flat, leaned way over on the curb. Turns out there had been an unseen crack in the steel wheel that reached the point of no return, and suddenly became a big problem.

Glad you weren't hurt Keith -- just a reminder of how much we take for granted every day! Makes me think how important it is to make each one count.

Safe spinning (and driving!),

Brad Vietje

Newbury, VT

Re: So there I was.....

#4

Mike Stafford

Very off topic.... '54 Chevy

Mike Stafford

>The Border Patrol has been alerted to be on the lookout for this particular red and white '54 Chevy...


img

Re: So there I was.....

#5

Re: So there I was.....

Carole Valentine

>I had some kind of vibration in my Explorer a year or so ago and took it to my mechanic. It was one of the rods. I am nervous enough that I am thinking about having the other replaced! So if it happens on the road, what's the best thing to do? Just coast instead of hitting the brakes? What happens if one of those things breaks going 70 MPH on the freeway? Glad you were not hurt, Keith.

Re: So there I was.....

#6

Re: So there I was.....

Ken Oakley-Sunny St. Cloud, Fla.

>If you were coming off the Whitestone heading for L.I. you were in Whitestone, Queens. Traveled that route many times before moving to Sunny St. Cloud, Fla.

Re: So there I was.....

#7

Re: So there I was.....

Scott in Socal

>In an Explorer (rear wheel drive), you'd let off the gas, use the hand brake, and downshift, avoiding putting braking on the front wheels. I spose you'd do the same in a front wheel drive, just without the downshifting.

Re: So there I was.....

#8

Re: So there I was.....

Bruce in Saint John, N.B. Canada

>Carole if you break a tie-rod while driving you would end up with steering control on one front wheel instead of both. There is a good chance the bad wheel on Keiths vehicle fish tailed after the tie-rod broke and upon applying the brakes this wheel would steer either right or left and probably not the direction you wanted to go thus a sudden thump and vibration. Keith was lucky to get his vehicle off the highway without having an accident. Looks like the traffic was heavy or there was no room (sholder) to get off the highway on the right hand side. Carole hope I haven't confused you, tie-rods don't normally break but the vehicles they manufacture in the last few years have less grease fittings on them especially on the steering system. You know, greased for life. I don't know where Keiths broke but it probably broke at one of the movable ends and lack of lubrication would cause wear and my have played a part of the cause. guess that is my 2 cents for this evening.

Re: So there I was.....

#9

Re: Very off topic.... '54 Chevy

Bill Houghton, Sebastopol, CA

>Are you sure that's a '54? Looks earlier.

Re: So there I was.....

#10

Re: So there I was.....

Jeff Willaford

>Same happened to my niece in Boston. F150 Harley Edition. She had just gotten off the interstate onto a backroad and bam! Glad to hear you managed to keep some sort of control and even better... got repairs in NY.

Re: So there I was.....

#11

Keith Tompkins

Re: So there I was.....

Keith Tompkins

>Hi Bruce, Yep, the bridge was three lanes each way with no shoulder at all, looking down the road while on the bridge I could see no shoulder in the distance. The median was my only choice. Two tow-truck drivers were sitting at the end of the bridge, and saw me coming; they said they were sure I was going into the wall, my right tire was completely out of control. The ball socket had popped apart; upon inspection, it was full of rust, no lubrication. The bad part is I had just had a new steering rack and pinion installed; along with new upper and lower ball joints. Unfortunately, the garage re-used the old outer tie-rod ends, it was one of those that broke. The bill was over a thousand dollars, yet they skimped on two twenty dollar parts.

Re: So there I was.....

#12

Re: Very off topic.... '54 Chevy

GaryG in MD

>I'm guessing 50-51. ...GG

Re: So there I was.....

#13

Moon Pies

Tommy Holmes

>Keith

Glad your situation didn't turn out worse than it did although it was bad enough. Talking about Moon Pies......I keep some around most of the time. Have you tried the new peanut butter ones? Different from other moon pies and give a Reeses cup a run for the money.

Re: So there I was.....

#14

Re: So there I was.....

Carole Valentine

>Thanks Bruce. My car is a 1997 so she is not a spring chicken and has certainly taken a bit of abuse traveling over the farm roads. I suppose if one tie rod was bad there might be a good chance the other could follow sooner rather than later. I was lucky the last time. It happened right before I left on a road trip which would have had me traveling the interstates. You know...I forgot there even WAS a hand brake (we call it the parking brake). Living in the flatlands, I don't think I have ever used it!

Re: So there I was.....

#15

Steven Antonucci

Hopefully your trip to NJ will be less painful

steve antonucci

>

Re: So there I was.....

#16

Re: Very off topic.... '54 Chevy

Bruce in Saint John, N.B. Canada

>Mike I think it is a 54 as the 53 had three vertical chrome pieces in the grill as well as round parking lights. The 54 had five vertical pieces in the grill and rectangular parking lights. If you look closely at the picture you can see where the five vertical chrome pieces have been removed and it does have the rectangular parking lights. The 51 & 52 were much different. The cars in the 50-60-70's and some of the 80's were real cars you could usually tell the year by the grill, I always maintain that the cars to-day will never be classics and usually you can't tell what year they are unless you see the paper registration. Iam not trying to start and argument Mike but just stating the facts and trying to be helpful.

Re: So there I was.....

#17

Glad it ended up OK

Don Orr

>Man that is a bad area to have a problem. I've driven that stretch and there is not really anywhere to go. Good thing you found a safe spot to get off the road. In spite of what most people think, NYC people are usually very helpful.

Re: So there I was.....

#18

Probaby a 52 *LINK*

Roger Smith

>Mike, the 52 Bel Air also had 5 vertial fins. The 54 parking lights were level with the grile bar and the 52 parking lights were below the bar. The 54 has very small burge running down the front fender at the center of the head lights. The 52 does not have this burge.

roger


52 Chevy

Re: So there I was.....

#19

Ellis Walentine

I think so too

Ellis Walentine

>I owned a '54 Chevy and a '50 Chevy when I was a teenager. I'm pretty sure that '52 was the last year for the split windshield. Also, as Roger mentioned, the '53 and '54 had a ridge on each of the front fenders, and the hood was slightly less rounded.

Ellis

Re: So there I was.....

#20

Mike Stafford

Re: Very off topic.... '54 Chevy

Mike Stafford

>None of you have an argument with me. I was told that it was a picture of a '54 Chevy but the truth is I wouldn't know. I am not a car buff.

I had no idea that any model came with that kind of Fred Flintstone power plant.....

Re: So there I was.....

#21

Mike Stafford

What about banana flavor, Tommy? :-)

Mike Stafford

>

Re: So there I was.....

#22

Mike Stafford

Re: Glad it ended up OK

Mike Stafford

>I was telling my wife about this thread and she asked if I mentioned the time I lost a wheel when I was in the Downtown tunnel in Norfolk...

I had a '65 Mustang that I had bought with the dream of restoring. I had no previous experience restoring cars so I did not know what I was getting into. We took it out for a spin and while going through the tunnel the right rear wheel came off. It seems that the lugs were stripped and the nuts were just sitting on there being held in place by a couple of threads. Let me tell you the Tunnel Authority was not very happy with me because it was on a Sunday afternoon on Memorial Day weekend..... Lots of unhappy people....

The Mustang was sold soon thereafter.

Re: So there I was.....

#23

Keith Tompkins

Re: Moon Pies

Keith Tompkins

>Now Tommy, You're a man after my own heart! I'll have to find that flavor! Banana too? Yeah. Hey, remember scooter pies? :)

Re: So there I was.....

#24

Re: Moon Pies

Tommy Holmes

>Banana too! I've got banana, chocolate, vanilla and strawberry in the cabinet now. oh, and the peanut butter too. Don't fool with the strawberry.

I must have lived a deprived life I only vaguely remember the scooter pie picture but not ever had one. I've always lived in the south. Is it a northern delicacy?

Re: So there I was.....

#25

Re:OK Keith, I've been around longer ....

Jamie Donaldson

>...than you, so I give up and have to ask- what the heck is a scooter pie? (;-O)