Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

My new Delta 46-460 midi is in the car.

Posts

My new Delta 46-460 midi is in the car.

#1

My new Delta 46-460 midi is in the car.

keith zimmerman, Normal, IL

>I picked it up at 7 Corners Ace Hardware in St Paul on Friday, while visiting the Twin Cities. Now, I have to build a custom bench for it so I can start turning.

I sure am looking forward to that.

keithz

Re: My new Delta 46-460 midi is in the car.

#2

Re: My new Delta 46-460 midi is in the car.

john lucas

>Keith I got to play with one at the new Woodcraft store in Chattanooga. It's a sweet lathe. Unfortunately I didn't get to actually turn on it but all of the controls work great, especially the belt tensioning and belt changing. Very well thought out. I look forward to actually getting to turn on one.

If it only came with 1 1/4x8 spindle I would jump on it in a heartbeat. I may still buy one.

Re: My new Delta 46-460 midi is in the car.

#3

Re: My new Delta 46-460 midi is in the car.

Lan Brady

>Keith,

Congrats!, I watched the video on youtube. Looks like a great machine.

Lan

Re: My new Delta 46-460 midi is in the car.

#4

Bill Blasic

Re: My new Delta 46-460 midi is in the car.

Bill Blasic

>Keith,

You are going to love that lathe. I've been using mine when I've been able to turn and it is so sweet, you'll see what I mean. Enjoy!

Bill

Re: My new Delta 46-460 midi is in the car.

#5

Re: My new Delta 46-460 midi is in the car.

Cyril Griesbach

>Good for you, Keith. I know you've waited a long time to get one.

Re: My new Delta 46-460 midi is in the car.

#6

Re: My new Delta 46-460 midi is in the car.

Pete in Holland, MI

>Don't turn in the car. You're other half will kill you when she uses the car next & sees wood dust all over!

On the other hand:

1) You can turn anywhere you travel

2) Open the doors at highway speed and you clean the shop

3) Climate controlled shop

4) Nice cushy seats

5) Nice radio

6) Why bring the wood to the lathe? Bring the lathe to the wood!

7) And, best of all, cup holders !

Maybe a lathe in your car isn't such a bad idea afterall :o)

Re: My new Delta 46-460 midi is in the car.

#7

headroom is too cramped. I'll move it to my shop.

keith zimmerman, Normal IL

>

Re: My new Delta 46-460 midi is in the car.

#8

Re: My new Delta 46-460 midi is in the car.

KEW

>I just got mine up and running Friday and had a good chance to try it out Saturday.

I think it is the best mini-lathe this side of the small Oneway.

I think the key things that set it apart are:

Power - The 8 Amp motor gives good torque. I rough turned a bowl and was able to cut as aggressive as I do on my PM3520b. Of course, I guess that means I don't turn aggressive enough to get the full goody out of the PM, but I would have stalled other mini's I've turned on. The speed was set at around 350RPM, so I'm glad to report that the EVS system doesn't suck out the torque too fast at lower speeds.

Drivetrain - The lathe is smooth and has a very competent sound. I don't know how else to say this, but it just conveys a no-nonsense sense of competence. I wonder if this is partly due to the belt they chose.

My biggest disappointment:

Even with a pretty heavy bowl for inertia, the coast-down was too fast for me. I like a free spinning lathe when the power is off. This lathe does not spin as freely as my PM and definitely not as freely as my Nova 3000. On the positive side I like the smooth but quick coast down when I turn off the machine. This is the one machine I have which stops about as soon as I'd be reaching for the handwheel (aka hand brake) on my other lathes.