Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Which pen kit for a first attempt?

Posts

Which pen kit for a first attempt?

#1

Which pen kit for a first attempt?

wilbur

>I've been turning for a while now, and am comfortable with bowls and basic spindle work. I'd like to try my hand at making a pen, but when I looked in my Packard Woodworks and Lee Valley catalogs and the Berea website, I got information overload as to the number and variety of pen kits out there.

So I'm looking for suggestions as to a first pen kit. Anyone?

Re: Which pen kit for a first attempt?

#2

Bill Blasic

Re: Which pen kit for a first attempt?

Bill Blasic

>Wilbur,

Try a Slimline for your first attempts, they are not expensive and will give you the basics to move up to more expensive kits.

Bill

Re: Which pen kit for a first attempt?

#3

Re: Which pen kit for a first attempt?

Carl Barton

>Wilbur,

When I started to make pens I did so with the cheapest and simplest pen that Woodcraft had, the slimline kit. It was about $3 for the kit and I did not have any worries about messing up a really expensive kit on my first couple pens. I recall that both catologs you are looking at have simular types/styles of pen kits.

Carl

Re: Which pen kit for a first attempt?

#4

I Recommend the Sierra

Jim Shaver - Oakville, Ont, Canada

>Hi Wilbur,

Although it is common to use a Streamline and I support the others on this, the easiest pen to make hands down for me is the twist Sierra. It is a single body, you can make two from a single pen blank, it has a nice feel and looks great. Many suppliers out there as well with man options on plating etc as well.

Take care,

Jim

PS, Got your email, Thank You!

Re: Which pen kit for a first attempt?

#5

Dick Hines

Re: I Recommend the Sierra

Dick Hines

>I don't do much pen turning but I am with Jim on recomending the Sierra kits. When you figure you can get two pens out of one blank the price is right also.

Re: Which pen kit for a first attempt?

#6

Steve Kubien

Re: I Recommend the Sierra

Steve Kubien

>I do a fair number of pens and I will echo Jim's recommendation on the Sierra. There just isn't anything easier. SLimlines and streamlines are pretty straight-forward as well but you've got two pieces to worry about plus aligning the grain plus making sure the finish is even on both..... Go with Sierra.

Steve Kubien

Re: Which pen kit for a first attempt?

#7

Re: I Recommend the Sierra

Chip in Plano

>I'm in the Sierra camp, too, because it's a nice man-size pen. The slimlines, while cheap, require you to turn down to a really, really thin piece of wood attached to the brass tube. It's easy to cut thru and sand thru. You are more likely to ruin the blank than the mechanism in my experience.

If you do the slimlines, just buy some extra tubes and cheap blanks so you can screw up a few. Keep yourself oriented consistently with where the tip and top are at all times everytime. This comment won't make sense until you don't.

Have fun.

Re: Which pen kit for a first attempt?

#8

Re: Which pen kit for a first attempt?

wilbur

>Thanks for the suggestions! The Sierra pen wasn't even on my radar, but I'm going to get some of these.