Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

review of 2 tools, long------WebKitFormBoundaryuQ+

Posts

review of 2 tools, long------WebKitFormBoundaryuQ+

#1

review of 2 tools, long------WebKitFormBoundaryuQ+

MFoster------WebKitFormBoundaryuQ+jVjBnDAK7PYc3

>I had a great day today. I was participating in an open studio for the state of VT and opened my doors to all comers. Not many sales, but i had a couple local turners stop in to say hello. Ralph Tursini, a turner in the Burlington area, stopped in on his way home from the Pinkerton symposium (which I really hated to miss) and planned on stopping by Johannes Michelsons home after leaving here. I had a nice conversation with another local turner who took classes from Johannes and purchased his lathe from him. Ideas are trickling around to possibly start a southern VT turners club.

I also had some real time in the shop to turn. My shop time in the past few months have been devoted to building a built in library (a full wall of bookshelves) and computer desk area so I have not had time to try a few new tools. Well I gave them a go today and I couldn't be happier.

I picked up a Rolly Munro hollower after seeing him demo at the Totally Turning symposium. I was skeptical about a new hollower (I have a number including a Jamieson and some Jordan Tools). I have had some Woodcut Proforme hollowers for quite a while, and was never really impressed with them. I found them really fussy to get adjusted just right, and never really felt they were any better than scraping systems. I would have to say that the Munro hollower is in a totally different league. It was a piece of cake to use right off the blocks. I decided to put it through some paces and mounted a block of split leaf maple and went at it. I used the Munro to rough turn, and shape the piece. I did pick up my trusty Glaser to refine the shape a little and get a nice surface. I then decided to see how deep I could hollow with the tool just hand held. Well, I totally hollowed this piece without picking up another tool. Even extended 7" out, I felt totally in control and relaxed. My depth hole was not quite deep enough, and I found the tool easy to use to extend the depth, even remove that pesky little center nib with just a little fussing. I don't usually turn thin, but I decided to really test this baby and turned this form down to 1/16"-1/8". Taking a light cut by adjusting the hood, I was able to smooth the walls without using another tool. I haven't needed to sharpen the cutter yet, but this seems straight forward, and you can replace it with a Hunter if you want. I didn't need to put the extra link on to turn this open form, but trying that will come later. To say the least, I like this tool.

I then used another tool that has been hanging out in my shop for a year without being used. I picked a Sanding Solution tool from the Sanding Glove people and just have not turned anything where it could be used. This form was perfect for it. I did not really want to get a drill into this form so picked up the tool to try it here. I have used passive sanders before, and wasn't impressed. This one definitely worked better, plus it is designed to reach into deep forms. If you are patient, and let the sander do the work, it is a great tool. So now I'm not regretting that purchase I made a year ago.

I have no affiliation with either of the companies/turners that make these tools, I just find that they are both superior products that live up to their claims. Admittedly, they are pricey, but I don't think I'm the only tool junkie on this site and these are a couple of sweet tools that will certainly add to ones stash without gathering too much dust.

So now I have to decide what to do with this practice piece. I'm thinking, give a go at some piercing. It's thin enough and needs something to add some zip. I've never been all that interested in piercing, but may just see what I can do with this for fun. I won't feel bad if I ruin it as it was really turned to put the Munro through it's paces.

Split leaf maple, 7.25"h x 6"d.

------WebKitFormBoundaryEEMGWsitVMF0+daZ

------WebKitFormBoundaryuQ+jVjBnDAK7PYc3


img

Re: review of 2 tools, long------WebKitFormBoundaryuQ+

#2

Re: review of 2 tools, long------WebKitFormBoundar

mfoster

>This is the original post that I ranted about below. I have looked at the forum on 2 different computers (Mac and PC) and the message was not there. Yet the forum shows it has had 93 views. How wierd is that. It seems it was lost in cyberspace for 2 days and mysteriously reappeared. I refreshed the page numerous times, but the message was not there till just about 1/2 hour ago.

Spock, beam me up.

Mike

Re: review of 2 tools, long------WebKitFormBoundaryuQ+

#3

Rob Wallace

A new dimension of sight and sound.... *LINK*

Rob Wallace

>Mike:

Recall that Rod Serling expanded his career and was made famous by portraying such metaphysical instances:

From premier of Twilight Zone, Season 4 (1963):

"You unlock this door with the key of imagination. Beyond it is another dimension: a dimension of sound, a dimension of sight, a dimension of mind. You're moving into a land of both shadow and substance, of things and ideas; you've just crossed over into the Twilight Zone."

50th Anniversary of TZ this coming October...

....coincidence?

Rob Wallace


Twilight Zone - Wikipedia

Re: review of 2 tools, long------WebKitFormBoundaryuQ+

#4

Live long and prosper Mike :)

Dave Peebles Lyons, Ohio!

>