Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

AAW Journal, Summer edition

Posts

AAW Journal, Summer edition

#1

AAW Journal, Summer edition

Ed Moore of SW VA

>It was announced last week on the AAW Forum that the Summer edition of the Journal was being mailed out. Has anyone received their copy yet? If so, what do you think of this edition?

Ed

Re: AAW Journal, Summer edition

#2

Re: AAW Journal, Summer edition

Greg Haugen

>Ed,

I haven't gotten my personal copy yet but I was at a Woodcraft over the weekend and they do have them now. I only quickly flipped through it, so it's hard to give an opinion just yet. However anything with woodworking, especially turning, and I'm a "happy camper" so I'll find the "good" in any of it and will be happy. I haven't written an article yet and have a lot of respect for those that are writing the articles and doing the editing. They'll never please everyone, and their work is appreciated and should be applauded.

Hopefully we'll get the issue soon.

Re: AAW Journal, Summer edition

#3

It's time to write on Greg-go for it.

john lucas

>

Re: AAW Journal, Summer edition

#4

Mike Hunter

Re: It's time to write on Greg-go for it.

Mike Hunter

>Your input on WoodCentral is well received. I agree with John. Go for it!

Re: AAW Journal, Summer edition

#5

Dick Hines

Re: AAW Journal, Summer edition

Dick Hines

>Don't get me started Ed. I have trouble with the AAW Journal being in the stores before they get to the people who have subscritpions. Woodturnind design does the same thing. One of these days I am going to throw a s+++ fit and just start buying it from Woodcraft.

Re: AAW Journal, Summer edition

#6

happens with every magazine

john lucas

>Dick I subscribe to over 15 magazines. I can't say for certain every one of them, but the ones I have checked I can by on the newstand before I get them at home. This includes Fine Woodworking, Wood, 2 machinist magazines, all 3 woodturning magazines,and several more. It's just the way they do things and it irritates me everyone wants to jump on the AAW for doing the same thing all other magazines do. Sorry for the rant but this happens virtually every issue and as I said, it's apparently a common practice and must have to do with the way they are mailed or packaged and they aren't picking on you or me.

Re: AAW Journal, Summer edition

#7

Dick Hines

Re: happens with every magazine

Dick Hines

>John I am not jumping on AAW. I am just complaining about "ALL" magazines. It just so happens that two of the four I get show up in stores before I get mine.

I know that most all magazines do it but it doesn't make it right. They push their subscriptions and then the subscribers are the last people to get their magazines.

Re: AAW Journal, Summer edition

#8

Re: happens with every magazine

Carol - graduated!

>This won't make any of you feel better, but I suspect the scenario goes a little like this:

The printer does the printing run and want to get them shipped ASAP. Bulk shipping for book stand distribution goes via truck. Delivered as quickly as is practical. Single issue distribution (subscriptions) goes media mail, one of the lowest priorities of the U. S. Post Office. Can they sit in the corner until the post office gets to them? Yup! It likely doesn't happen at YOUR post office; more likely at some main distribution type post office.

Not to start a political rant, but your rant is most likely aimed at the wrong party.

Re: AAW Journal, Summer edition

#9

Re: happens with every magazine

Ed in Leaside

>And before the subscriptions get to the PO all have to be addressed. This is done in Postal Code batches (presorted for PO).

Re: AAW Journal, Summer edition

#10

Got my AAW Journal, Summer edition today

bob elliott

>Tips section is back (thanks John) and I also read the article on "Pneumatic Carving Stand". The carving stand is the Trent Bosch model and the modifications are pretty much something I learned from Terry Scott several months back. Terry's idea does not require tapping any threads and he suggests over drilling slightly and the use of epoxy instead to join the male pneumatic connector.

Re: AAW Journal, Summer edition

#11

Re: Got my AAW Journal, Summer edition today

Mike Cunningham (Cape May NJ)

>I'm pleased to see a return of the tips section as well. Bob Rosand's article on parting tools was good for beginners as well as a refresher for more advanced, too bad the text beneath the photo of his parting tools was reversed. I'm sure he wrote it properly, you'd think something as obvious as this would have been caught in editing.

I think that five articles on what I'd call "human interest" is overkill. Seitzman (who I've taken inspiration from), Saylan (who's fantastic) and Gilson (ditto), Muskego chapel (???) and Dysfuntional (yes it is...........too much for one issue.

I agree about your take on the pneumatic carving stand and there are much easier ways to make vac chucks.