Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

ex rougher tip in Kelton rig

Posts

ex rougher tip in Kelton rig

#1

ex rougher tip in Kelton rig

joaz

>I use the ezrougher for hogging out interior of bowls, mostly natural edge. It's a really good tool for determining wall thickhness through the bark when I start turning the interior. With deep NE pieces, I generally use the Kelton rig with the swivel tip and tear drop scraper. My kelton has been bored out to take the Jamison bar.

I realized yesterday that I can mount the rougher square tip on the bar since the hole in the tip is the right size for the screw that holds the Jamison accessories. This allows me to take the wall down really fast to a rough thickness and then finish off with the tear drop scraper.

I wish Craig would make a round tip for the original ez rougher, but so far he only makes one for his new finishing tool.

If you get a chance to try this tool, go for it. It really is a nice tool.

Disclaimer-no connection with EZ Rougher...just a happy customer.


img

Re: ex rougher tip in Kelton rig

#2

Re: ex rougher tip in Kelton rig *LINK*

Fred Holder

>I purchased the Easy Rougher Ci1 and Ci2 and the Desert Woodturning Roundup this last February. I've found them both the be excellent tools. Actually, I like the Ci1 best, but they both work well. At the Utah Woodturning Symposium I found out that he now has a round cutter and he demonstrated that it works as well as theCi1, but will get into those places that a rounded tool is necessary. I'm going to have to add one of those to my tool inventory.


More Woodturning Website

Re: ex rougher tip in Kelton rig

#3

Re: ex rougher tip in Kelton rig

joaz

>Your right Fred, he does make a round one. However, it will only fit the new tool. I think it is called the "Finisher"

Re: ex rougher tip in Kelton rig

#4

ez or ex?

Barbara Gill, Remlik VA

>

Re: ex rougher tip in Kelton rig

#5

ez..u can't get away with a typo on this forum

joaz

>

Re: ex rougher tip in Kelton rig

#6

Re: ez..u can't get away with a typo on this forum

Barbara Gill, Remlik VA

>I thought it was a typo originally but when responders left it as it was I thought I may have been wrong.