Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

rim enhancement

Posts

rim enhancement

#1

rim enhancement

Skip Beardsley------WebKitFormBoundarylsHY4+4w161B

>A recent post about rim enhancement prompted me to take some pictures of some I have done recently using a router jig and the lathe index.

Since we have very little hardwood here in NW Montana, and what we usually get is mostly birch, rim enhancement seems to make some sense.

I came up with the interrupted pattern because I wanted to do something which could not be done with normal tools. I think there will be some variations of this on future bowls.

The bowl is 10.5 x3 with a lacquer finish.

As evidenced by this bowl, I will have to figure a better way to center the inlay on the rim. With the jig in place it is very difficult to see the rim.

As always, comments will be appreciated.

Skip


img

Re: rim enhancement

#2

Steven Antonucci

Do the inlay first, then turn the final thickness

Steve antonucci

>That should be an easy way to control how much you remove on the inside to get the pattern centered.

Interesting effect. Maybe make a template and inlay a wood alternating? Lots of ways you could take this one...

Steve