Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Pen Kits

Posts

Pen Kits

#1

Pen Kits

Jim Rutten

>I recently turned 10 sierra button click pens from kits I bought from Lee Valley. Out of the 10, on three of them the spring was too light to let the pen click. Under a magnifying glass you could see the difference between the ones that didn't work and the ones that did because the ones that didn't have less closed loops. Just to make sure, I took one of the springs from a working pen and replaced one of these faulty spring and it worked. I need no reimbursement because I found promotional pens with heavier springs to replace these bad ones and it worked fine. So here's my question. I don't think Lee Valley should have to deal with me complaining about too light of springs since they are just the reseller so is there anyway to contact Sierra to suggest my upgrade to their product?

Re: Pen Kits

#2

Re: Pen Kits

Jim Shaver - Oakville, Ont

>Berea ..

Re: Pen Kits

#3

Re: Pen Kits

Jim Rutten

>Berea makes them?

Re: Pen Kits

#4

Re: Pen Kits

Jim Shaver - Oakville, Ont

>Hi Jim,

Yes they are as I understand it they are the prime importer into North America from the manf in Taiwan. I understand that all the re-sellers buy from Berea...

But I could be wrong? At any rate even calling LV could get you on the right path as well, I have read on other forums the same complaint about the sping, and the same solution.

Take care,

Jim

Re: Pen Kits

#5

Re: Pen Kits

Rick Allen

>This is a Lee Valley problem and you would be doing them a disservice if you didn't give them a chance to make it right.