Dick Coers - Articulated Hollowing Rig
GalenV in Iowa
>Dick:
Although I am not finished I thought I would show you where I am at on your articulated hollowing rig for adapting to my Jet 1220.
The 3/8" tees and 5/8" bolts came out really close to puttng my cutter on centerline. Only pipe nipples I had were 5" and 2 1/2" and think they need to be shorter. I used a few more nylon bushings and need to turn them down. I have a foam bike handle I will slip over the hollowing mounting pipe it needs to be tapped for set screws to hole the bar.
I think it looked like you may have put a spot braze on the tees to prevent turning. I will lead in or pin when I think I got better nipple combination. My maple bed adapter may end up too light but it fit the height.
May find this is all too light to be stable but hey it kept me busy.
Got any more comments on how yours is working out?
Thanks for posting idea.
Galen



