Sanding extensions
Paul Zerjay
>I made a HF that's about ten inches deep. During the drying process, it got some cracks close to the neck of the vessel, so I cut them out in the shape of a Nike swoosh. The vessel is maple and it has issues with tearout. I can get the tearout on the outside to a good finish, but the inside is another story, and you can see in there pretty good now that it opened up. The vessel has walls that measure 3/16, and vibration is starting to become an issue. I have made a version of John Lucas' flap sander, but it's just not doing the job. Does anyone know of something I can make, or purchase that will allow me to sand the inside walls and be able to reach ten inches deep?




