Curly African Sumac hollowform....
Steve antonucci
>This is the other half of the piece that I received in the WoodCentral exchange from a couple of days back. Now I think you can see the anguish and aggony of cutting through a vessel when you are entrusted with a piece of wood like this...
It's something like 6"x5", sanded to 400 grit, and two coats of bush Oil so far. I hang it from the monofilament while it dries by tying a stick and dropping it in the hole. Shake or two and the stick falls out...
Comments always welcome...
Steve




