Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Turn,Turn, Turn OR turn, Ruminate, Idea, Turn?

Posts

Turn,Turn, Turn OR turn, Ruminate, Idea, Turn?

#1

Turn,Turn, Turn OR turn, Ruminate, Idea, Turn?

charlie belden

>There are times when turning is almost a compulsion. I'll stumble on a technique or a type of turning - and turn and keep turning - 'til it stops being interesting. Sometimes that leads to more refined pieces - better proportions, crisper details maybe more delicate pieces.

Lately I get an idea for a piece, turn it, or find out I can't, at least not yet, then ruminate for a while before going back to the lathe. Sometimes that ruminating leads to a variation of an earlier piece or something new to me - or gets me back to some flatwork for a while.

Do you find that turning a lot, say a bunch of bowls or boxes, has lead you to better and better pieces?

Or

Have you found that ruminating a bit - away from the lathe - results in better pieces?

Or

Does it matter at all to you?

Re: Turn,Turn, Turn OR turn, Ruminate, Idea, Turn?

#2

Re: Turn,Turn, Turn OR turn, Ruminate, Idea, Turn?

Marc Phillips

>I am sure that this would be an individual response.... as we all learn things differently. For me, I have to read, read, read... then get on the lathe with the information fresh in my head and turn, turn, turn.... I do tend to lose some interest once I "get it" and move on to something that I totally suck at :) Then I bug you nice folks with lots of questions :)

Re: Turn,Turn, Turn OR turn, Ruminate, Idea, Turn?

#3

JL

Re: Turn,Turn, Turn OR turn, Ruminate, Idea, Turn?

JL

>Ruminate - an interesting word. Comes from the name of the first stomach (rumen) of various animals (ruminants). I guess I can chew an idea.

I sketch ideas. I draw them out on paper. Paper is cheaper and easier to work with than wood. I can also have books present which I can either copy from or use as a source of inspiration.

I then see if the idea works. I've got a lot of soft maple blanks - I use them. I've got other inexpensive wood, I use it.

I guess I go more with - Idea, ruminate, turn, ruminate, turn. This doesn't mean I don't turn, turn, turn on occasion - depends on how the muse strikes me.

Re: Turn,Turn, Turn OR turn, Ruminate, Idea, Turn?

#4

Steven Antonucci

Turning vs. creating

Steve antonucci

>I had a workshop in my studi... garage over the weekend that had 3 new turners in it, and I was trying to explain that there are days that I go out to turn, other days that I go out to practice, and still other days that I go out to "do work".

On the days that I am turning, my goal is to produce something well that I have produced before. I might cut a half dozen or more bowls just to produce those bowls. The goal is to end up with a "product".

Practice days are different. I don't necessarily make something, but try to figure out ways to make something. At the end of a practice day, I usually haven't done something from start to finish, and almost always I am using a previously worked on item. The goal is to do something that I haven't done before.

Work days are days when I attempt to bring a specific idea to life using all of the things in my bag. I set out with a specfic idea and attempt to execute it. I probably only have a handful of these per year, and I find them the days that are the most rewarding or frustrating based upon results.

Then there are days when I just go fuddle around the shop and sit in my folding chair... waiting to figure out what I want to do that day. If it doesn't come to me, I usually turn out the lights and lay in the hammock. I've found that some of my best ideas come to me just as I get comfortable, but they can wait for tomorrow....

Steve