Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Chainsaw sharpener question

Posts

Chainsaw sharpener question

#1

Chainsaw sharpener question

Ed Moore of SW VA

>I have decided to get a motorized chainsaw sharpener. I don't need a BMW, but I don't want a Yugo either. I earnestly seek your wise counsel in this matter.

This all started when I saw the ad in the Garrett Wade catalog. A review suggests that the GW model might be a little light. If you have one of the GW sharpeners I would like your appraisal of it.

Many thanks to the WC family,

Ed

Re: Chainsaw sharpener question

#2

Re: Chainsaw sharpener question

Gary Evans Tallassee, TN

>I have an older model that I have used for years. The only feature I would look for would be a positive spindle lock. Sticking the pin in the hole is not the best way to go about it.

Gary

Re: Chainsaw sharpener question

#3

Re: Chainsaw sharpener question

gil jones......ga

>May not be the best way, but I have been sharpening my chains with a Dremel tool for a long time. Works OK for me, is pretty fast, and is done on the bar.

Gil

Re: Chainsaw sharpener question

#4

Re: Chainsaw sharpener question

jim miles - Charlote NC

>Dremel: - Me to- cost about $2 - $3 for bit, they make a special bit for chain saw sharpe, works fine for me

Re: Chainsaw sharpener question

#5

Re: Chainsaw sharpener question

Jorge Castaneda~Downeast Maine

>Ed,

I don't have one, but I remember a fellow that sharpened chains in minutes, his rig was a Belsaw, I do not know if that company is still around, but their main line was sharpening tools to help retiree's earn some.

I did stop having my chains sharpened whe I learn to do it with a file. Lee Valley sells, burrs that you use with a drill.

Do a search...

Jorge

Re: Chainsaw sharpener question

#6

Re: Chainsaw sharpener question

Marc Phillips

>This wont help I know... sorry. I use a dremel with one of those stones they have for sharpening chainsaws.... do it right on the saw quick and easy, and after a few sharpenings I replace the chain and start over.

Re: Chainsaw sharpener question

#7

Re: Chainsaw sharpener question

D. Hansen

>Oregon has a pretty good one that runs on 12volts. If you have a battery charger or spare 12 V battery you have a power source. It works with the chain on the saw. Costs around $20 as I remember. Main advantage is that you can use it in the field. Doesn't even faze my tractor battery for several sharpening s in the field.

Re: Chainsaw sharpener question

#8

Re: Chainsaw sharpener question

Gary Evans Tallassee, TN

>I also recommend going 12V. I almost always have my vehicle close when I'm cutting wood. Easy to touch up the blade from time to time.

Gary

Re: Chainsaw sharpener question

#9

Chainsaw sharpener Answer

Ed Moore of SW VA

>I went over to a friend's shop this morning and used his Harbor Freight sharpener. It did a great job. I needed to go to Northern Equipment for a different purpose, so while I was there I looked at the Northern sharpener for $120. Sitting next to it was an Oregon sharpener that was identical, except that the price was $350. I mentioned to the salesman that I had seen the Northern on the internet for $85 - $90. He checked, and sure enough $89.99 on the Northern site. He wrote that price on box and that is what I paid. It is entirely possible that the Harbor Freight would have been adequate for my needs, but this is my story and I'm sticking to it.

Thanks to all who contributed,

Ed

Re: Chainsaw sharpener question

#10

Chainsaw sharpener on the front porch

Molly Winton

>Your question is a little premature Ed. My new Garrett Wade sharpener is still in the box on my front stoop. It just arrived today. When I give it a go, I'll let you know what I think.