latthe tools
jack Ennis martin
>Hello
What is the opinion of the readers about the less expensive lathe tool set lEE VALLY has in the current catalog; they are priced at 175 dollars Cananadian. Thank you Jack Ennis Martin
Knowledge You Can Build On — Est. 1998
latthe tools
jack Ennis martin
>Hello
What is the opinion of the readers about the less expensive lathe tool set lEE VALLY has in the current catalog; they are priced at 175 dollars Cananadian. Thank you Jack Ennis Martin
Re: lathe tools - my opinion
JL
>Are you referring to the "Economy Turning Tools"? Seems to be the same price US or Canadian.
I've got the tool roll (not the tools). I really like it. It is a good transporter for lathe tools.
I don't know if that is what you really want/need. A good basic set does get you started. However, you may want to think about what tools you would really be using.
I do mostly spindle work. My basic set is:
Roughing gouge - 3/4"
Roughing gouge - 1 1/4"
Spindle gouge - 3/8", 1/2"
Oval Skew - 3/4", 1 1/4"
Parting tool - 3/16", 1/8"
and other tools.
If I were doing a lot of bowls, I would have some bowl gouges of a couple of different sizes as well as other tools.
I guess what I'm trying to say is - get the tool roll, especially if you're going to be traveling. Pick and choose your other tools.
Re: lathe tools - my opinion
Jim Sebring
>I recently bought several of Penn State's "Benjamin's Best" bowl and spindle gouges to try out different bevel angle and wing shape grinds. At the prices I paid, I'm very happy with them. They seem to accept and hold an edge as well as other more expensive M2 HSS tools I have.
How much turning will you be doing?
Steve antonucci
>Inexpensive sets are usually a bargain PER TOOL, but if you turn a lot, you'll see that a great many of them aren't really all that useful.
I would start with the best I could afford in a smaller set. It is better to be good with a few good tools than to not be good with a lot of so-so tools.
I can't live without: a 1/2" bowl gouge, a spindle/detail gouge, a parting tool, and a domed scraper. Every other tool on the market can be replaced in function with these four, if you know how to use them.
Next tool after these four is a skew...and you can probably get the 5 for $175 and never have to worry if your tools are any good.
steve
Re: lathe tools - my opinion
Bill Howatt
>Another vote for Benjamin's Best. Very good value for the money. They aren't Doug Thompson's quality but they are on par with many "brand-name" tools costing more.
Bill